I recently received an order from you that included Drain Plug (27001-0022). Part number 4682-20. In the photo on your website, the plug has a thick o ring, which is the same diameter as the plug. The one I received has an o ring included that is much smaller in thickness. Is this the correct o ring and will it work when I use this plug to shut off the drain on my filter box or do I need the thicker o ring???
Reply
Hello Jeffrey, The oring that came with the set is the correct oring. If the oring is too thick it will not seal correctly and leaking will occur.
Reply
Where does the 2" measurement get taken? I have a plug that looks just like this but the inside diam of o-ring is roughly 2-1/4" to 2-3/8".
Reply
Hi. The 2" measurement is taken from the threaded part of this plug. The O-ring dimensions are 2 3/4" OD / 2 3/8" ID.
Reply
I have a sta-rite system 3 model S7MD60 need a replacement drain plug, but the outer measurement of the threads is 1 13/16 which is so different then what you have listed. Any ideas? Also the solar pool I ordered last year feel apart in about month and half never had that happen before. What do you have and what is the warrenty?
Reply
Hi, Jeff. This is the correct drain plug for the Sta-Rite System 3 model S7MD60 and other models. I was unable to locate any past orders using this email address. If you can provide that info I can look into any warranty inquiries you may have.
Reply
Is this the right drain plug for a Sta-rite S7M120 model? I need the side drain plug and o-ring. NOT THE BOTTOM DRAIN.
Reply
Hi Cinda, this is the correct side drain plug and o ring for the Sta Rite System 3 model S7M120 filter.
Reply
Does this plug fit S8D110
Reply
Hi Jerry, that 27001-0022 Drain Plug will fit the side drain on your Sta-Rite System 3 S8D110 DE filter. The o-ring is included - be sure to put some lubricant on it to help it seal up and last longer.
Reply