We have a Hayward EC 45 filter with a damaged top. It is similar to a EC-10334P shown in your catalog (the one in the catalog is for a EC 40 filter). Does it fit an EC 45?
Reply
Kurt, Yes, this filter head (ecx10334p) fits both the EC40 and EC45 models.
Reply
hi i have a ec50 the head has two cracks in it would this let de back into pool I've already changed the diaphragm
Reply
Hi Bill, A crack lid would not allow DE powder to get back into the pool. There is probably a tear in one or a few of the Flex Tubes (ECX1032) which would need to be replaced.
Reply
I have a crack on my Hayward perflex filter head model EC-45. Is there a replacement filter head ?
Reply
I have a Hayward ec45a filter and then top has a crack and is leaking . How much is the cover compared to a whole new filter
Reply
I need the male connecter for the Hayward EC-40 that connects the pump to the flexible pipe that goes to the pool? Seems to be 7/8 inch thread on one side and 1 1/4 " diam to connect to pipe.
Reply
Hi, Paul. You can use the 1-1/2" MPT x 1-1/2" / 1-1/4" Hose Adapter - 417-6060.
Reply
I have a Hayward filter with a crack in lid and needs to be replaced. Cannot find a # on filter of size. Numbers I did find on filter are sn#5604 and another# below that is 340H32. Are u able to tell me the correct size so I can order the appropriate lid. Thank you
Reply
Hello, Can you please provide a picture of the lid and entire unit?
Reply
I have the Hayward model EC45 and the filter head is leaking from the area where there is a gasket. Can I take this apart and replace the gasket or do I need to purchase the whole filter head unit?
Reply
Hi Terry, You can use the ECX1003 Diaphragm Gasket listed as key # 12B on the Hayward Perflex Parts Diagram
Reply
