It appears that your browser has JavaScript disabled:
To provide the best experience on our website, we require your browser to have JavaScript enabled.
Here are the instructions for how to enable JavaScript in your web browser.
Once you've enabled Javascript, please refresh this page.

Or give us a call at 407-834-2200, and we would be happy to take your order by phone.

Back to Details

Questions for: Custom Molded Products Plastic Front Sealing Frame for Hayward Lights by CMP - SPX0507A1

Got a Question?

? Asked on 5/21/2017by Howard coleman

Do you have this in gray
Reply

A Answered on 5/24/2017 by InyoPools Product Specialist Lennox H.

Hi, Howard. This Sealing Ring is available in dark gray p/n SPX0507A1DGR.
Reply

? Asked on 5/29/2017by kraymondksc

I currently have a chrome face plate and would like to replace with this white one. Can I replace the face plate with water in the pool or does it have to be drained below the pool light.
Reply

A Answered on 6/4/2017 by InyoPools Product Specialist Megan C.

Hi. The pool does not have to be drained to install this sealing ring.
Reply

Commented on 4/15/2020 by Product Owner

removing the face plate wont cause the liner to slip?
Reply

? Asked on 7/30/2018by Inyo Visitor

Do you need any gaskets with this sealing ring. Thank you
Reply

A Answered on 7/30/2018 by InyoPools Product Specialist Parker B.

Hello. This niche requires Gasket, Liner Niche (g-96).
Reply

? Asked on 4/15/2020by timothy simpson

Is this for a standard Amerilite 12v 300 watt inground pool light? Sorry got the winter cover on and don't want to remove everything to look..
Reply

A Answered on 11/6/2020 by InyoPools Product Specialist Hector F.

Hi Timothy, all we would need to know is the cord length that you will need and we should be able to locate that Pentair Amerite complete light fixture for you.
Reply

? Asked on 4/21/2020by James R. Benton

Will this front frame match up with a SPX0580 face rim ? Thanks
Reply

A Answered on 4/21/2020 by InyoPools Product Specialist Lennox H.

Hi, James. This Sealing Ring - SPX0507A1 for the SP607 Series Niche is compatible with The Astrolite Fixture Face Ring.
Reply

? Asked on 8/23/2020by Mat

I am having problems putting my light back into the niche. It popped out and previous owners had it rigged with some sort of clamps. I have sp-607 niche with a sp-581 light. Does this get held in with a screw at both the top and bottom. I can't tell if there is a screw hole in the top of the niche? Faceplate has holes at both. Just doesn't seam to be anything to screw into on the top.
Reply

A Answered on 8/25/2020 by InyoPools Product Specialist Lennox H.

Hi, Mat. It your case, it appears that the Sealing Ring - SPX0507A1 will need to be replaced.
Reply

Commented on 8/26/2020 by Product Owner

Hi, thanks for the response. So after looking at the picture of the sealing ring, mine appears to be fine. My question is regarding how the light is held in the niche. There appears to be only one screw hole, located on the bottom of the sealing ring, is this the only screw holding in the light fixture? Looking at diagrams it seams like there is supposed to be a screw at the top also, but the sealing ring doesn't show any and I can't see a hole when inside my niche. Sorry for any confusion.
Reply
- Commented on 8/27/2020 by InyoPools Product Specialist Lennox H.
  
  Mat, The fixture does not screw into the sealing ring, but the niche. There should be a screw tab behind the sealing ring on the actual niche. If that is not there, then you will need a Light Repair Wedge - 132 to keep the fixture in place.
  Reply