I have a eco-kleer sand filter. My handle broke today and can't find a part number on just the handle. It is a 7 position multi port valve. My filter model number is EKS-101285. Can you please help me?
Reply
Hi Paula, The Waterway Eco-Kleer sand filter uses the WVS003 Valve. If you need just the handle on the WVS003 valve then you would require the Waterway Eco-Kleer Valve Handle here.
Reply
While pressing down on the handle, it broke where it is threaded inside. The handle, pin and washer seem to be ok. What needs to be replaced?
Reply
In his case you would only need to replace the handle and the diverter it is attached to if that is broken as well.
Reply
The handle on my pump broke. The only model number I can see is s190tscp
will this handle work, or what do i need?
Reply
Hi, The Valve Handle (SPX0710XF) will work with the valve for your S190TSCP model filter. You can follow our How To Replace a Pool Multiport Valve Handle guide.
Reply
The handle on our Hayward Pro Series S220T broke. I believe the valve is a 2P0714T will the SPX0710XF handle work on this filter?
Reply
Hi, The Cycolac Handle (SPX0710XF) will work with the SP0714T valve used on the Hayward Pro Series S220T Sand Filter.
Reply
What handle will fit my sp714tx haywood valve? thanks
Reply
Michael- The handle to fit on your SP0714T is the 4700-01x Handle, Cycolac (spx0710xf).
Reply
I went to backwash my pool and broke handle off. What do part do i need to order...MODEL SW-166T, SW-190T SERIES
Reply
This handle is the correct replacement valve handle for the Hayward SW-166T and SW-190T Series filters.
Reply
Which is the correct handle for model dev48?
Reply
John, The handle assy for the DEV Series filter is part # 4580-001. It includes both the handles and two sets of screws.
Reply
how do I compress the spring in order to change the handle out on the multiport valve?
Reply
Hi, Barry. You can follow the steps in our How To Replace a Pool Multiport Valve Handle guide.
Reply
Will this handle work for the dream line s190tscp? Also which gasket would I need. Thanks
Reply
Yes, if your current multiport valve is the original that came with the filter then that would be the correct handle and the spider gasket will be part number 4703-23 that you can view by clicking here. It is glued into this diverter.
Reply
Thanks for the reply hector. Im actually asking about the non metallic bearing that is right below the handle. Also will the pin from my existing broken handle work or would I need a new one of those? Thanks
Reply
Which product number for the whole key cover assembly for a dream line s190tscp? A link would be helpful. Thank you
Reply
Hi Brandon, could you provide the top multiport model number or send us a few photos? One of the complete valve and one of the very top of it looking down at it? To supply photos simply click the reply link below and upload your photos. Once we get those photos we can make the proper recommendation.
Reply