will this Impeller fit super II pump 2 hp model # C48M2N111A3
Reply
will this Impeller fit super II pump 2 hp model # C48M2N111A3
Reply
will the impeller # sp3010-c work on a century # st1152
Reply
my diffuser, impeller and ring has gone bad and I need to replace it.
my motor is Century HST150, housing is SP3020EEAZ. The part that is there right now is diffuser SP3000BN, impeller SP3010C and ring SP3005R.
I found that SP3010C is for 1HP motor but mine is 1.5HP. Is that the reason that my diffuser got damaged? looks like the ring rubbed against the diffuser causing the damage. Did the guy I hired put the wrong parts? Whats the correct diffuser, impeller and ring part number for me?
Reply
Hi, Rakesh S. The parts diffuser SP3000BN, impeller SP3010C, and ring SP3005R are correct based on the HST150 motor. If the Impeller Ring was installed incorrectly, that can cause damage to the impeller.
Reply
Can I use sp3015c instead of sp3019c with HST150 motor. It is full rated 1.5HP motor?
Reply
I need a new impeller + gaskets. What do you mean by up rate? . Now with a 2.2HP motor, which impeller would I use.
Hi Rick, could you send us a few photos of your pump so we can suggest the proper seal kit? If so then please take a wide shot of the complete pump to include the pipes going in and out of the pump. To supply photos simply click the reply link below and upload your photos or provide them using our live online chat feature. Once we get those photos we can make the proper recommendation for your seal kit and here is a guide that we put together called "How To Understand True Pump Horsepower - Up Rated vs Full Rated" that best explains the difference between the two.
Reply
I have a SP310X15AZ pump inground pool. Manufacturer is Hayward. I would like to change the impeller. What parts would you recommend?
Reply
Hello Peter. Impeller selection is a direct relationship to the pump motor's total horsepower (THP). The THP rating for the Hayward Pool Pump model SP3010X15AZ is 1.5. The impeller correct impeller would then be the model SPX3010C. Impeller for Hayward Super II 1.5 THP - SPX3010C It is recommended that when replacing the impeller that the motor shaft seal, seal plate gasket and diffuser o-ring be replaced concurrently. The GOKIT2 contains the parts required to complete the process. GOKIT2 If you wish to increase the size of the impeller, then a corresponding increase in motor THP would be advised.
Reply
Great website from which I had reached the recommendations you suggested but needed some hand holding!
Reply
Thank you for replying back, I emailed you two quotes to review for options to consider for replacement parts. The model#SP3010X15AZ can use the Generic Super II Pump™ Style Drive Train UpGrade Kit 1.5 THP - PL2762 The items in the Drive Train Kit should be replaced every ten years or replace the whole pump as they have completed the estimated life span.
Reply