Does this fit a S166TPAK filter? Thank you.
Reply
Hi Stephen, This label fits on the SP710 valves. The valve sits on top of your filter. The SP714 and SP704 valves both fit onto the S166T filter, however, you have to confirm if you have one of those two valves.
Reply
I have a Hayward DE filter with a SP710XR50 Vari-Flo valve. I'm trying to find a new label for it. My current label, going clockwise from the 12 o'clock position says: Backwash, Recirculate, Rinse, Filter (at the 6 o'clock position), Waste and Closed. All the labels I find online are the opposite with Filter at 12:00 and Backwash at 6:00. (See attached photo.) Any help would be very much appreciated. Thank you!
Hi Bill, We are showing that this SPX0710G Hayward Valve Label as the proper replacement label for your SP710XR50 Vari-Flo valve. You may want to buy this label and simply use a marker to mark out the valve positions on the new label and re-write with the correct positions.
Reply
Everything on this label is opposite from how my valve is marked. If every printing were switched with the print directly opposite it, this is what I want to purchase. other sites have the exact same issue .
Reply
We suggest you check with Hayward 1-888-Hayward or Hayward.com
Reply
We suggest you check with Hayward 1-888-Hayward or Hayward.com
Reply
Your valve may be prior to 1975 & we just are not able to match it any longer.
Reply
on the 711 multiport vslve how do I replaqce the spider gasket?
Reply
Hi, On the 711 Valve the spider gasket is glued into the diverter so you will need this SP711 Valve Diverter w/ glued in Spider Gasket
Reply
i have an SP-710X62 Vari-Flo filter control valve that needs a new label plate. which one should i order?
Reply
Hello Dale, this is the correct valve cover label for the Hayward VariFlo SP710 series multiport valve from 1976-current models. I have emailed you an estimate that you can convert to an order if you would like as well. The label is ready to ship.
Reply
