?     Asked on 8/30/2009by Guest

I would like to know if this assembly comes complete with center pipe and 10 laterals?
 Reply

A  Answered on 8/30/2009 by InyoPools Product Specialist Patrick P.

Yes this item includes the center pipe and 10 laterals (Laterals - item # 4800-15, mfg # SX200-Q), The Hub and Center Pipe measures 19" Tall.
 Reply


?     Asked on 6/8/2015by Ruthie

This is the part number we need, but does not look like the part we have? Has this changed!
 Reply

A  Answered on 6/13/2015 by InyoPools Product Specialist Lennox H.

Ruthie, I don't think that this part has change to the point that it will fit the Hayward Swim Pro SW-236T Sand Filter.
 Reply


?     Asked on 9/13/2015by victor

what's the difference between swx236da2 and swx256da2?
 Reply

A  Answered on 9/17/2015 by InyoPools Product Specialist Lennox H.

Hi Victor, The difference between the two lateral assembly would be the size of the assembly which is for two different model sand filters. The SWX236DA2 is for the SW236T model sand filter and the SWX256DA2 is for the SW256T model sand filter.
 Reply


?     Asked on 8/3/2018by HOWARD GREENBERG

Good Afternoon, I have a model SW-236T Swim Pro sand filter. Why am i getting sand returning back into the pool? I just replaced the 6 port valve because the handle stem broke off. I also replaced the sand in the filter. 200 lbs
 Reply

A  Answered on 8/3/2018 by InyoPools Product Specialist Steve M.

Typically the reasons why sand returns back to the pool is because of the spider gasket in the multiport valve or the laterals. Since you have already replaced the valve then I would advise inspecting the entire standpipe assembly including the laterals for any damage.
 Reply


?     Asked on 3/23/2019by LeAnne

We have a Swim Pro Sand Filter and need to replace the assembly inside because the pipe is cracked and some of the laterals are loose. Problem is I don't know the number because it's worn off. I do know it holds 250 lbs. of sand. Can you help?
 Reply

A  Answered on 4/12/2019 by InyoPools Product Specialist Lennox H.

Hi, LeAnne. A SwimPro filter that requires 250 lbs of sand used the SWX256DA2 Lateral Assembly.
 Reply


?     Asked on 5/27/2019by Jerry

Will this fit a Hayward S210t filter?
 Reply

A  Answered on 5/27/2019 by InyoPools Product Specialist Patrick P.

Hi Jerry, No this lateral assembly does not fit the Hayward S210T you will require this Hayward S210T Lateral Assembly SX210DA
 Reply


?     Asked on 6/9/2019by Tammy

The center pipe in my sand pump is cracked and needs replced.I can't find the exact model to replace it.Are any of these interchangeable?
 Reply

A  Answered on 6/10/2019 by InyoPools Product Specialist Patrick P.

Hi Tammy, Could you send us a few photos of your filter? A close of the label on the filter, a wide shot of the filter and a close up of the Valve label? To supply photos simply click the reply link below and upload your photos. Once we get any of this information we can make the proper recommendation.
 Reply


?     Asked on 6/9/2019by MATTHEW MAY

Have a Clean Machine sand fillter AC266 need a lateral pipe assembly for it. Can you help? Thank you for your time.

 Reply

A  Answered on 7/18/2019 by InyoPools Product Specialist Hector F.

Unfortunately, we do not carry that lateral assembly for that model filter. 
 Reply


?     Asked on 6/30/2019by Inyo Visitor

The dimensions look like it will fit our Tagelus Deluxe TA400. What are your thoughts?

 Reply

A  Answered on 6/30/2019 by InyoPools Product Specialist Lennox H.

Hi. This assembly will not work. You will need P/N 155061 (1) and 152290 (8). 
 Reply