What size laterals do I need for a Tagelus TA 60 filter and how many?
Reply
Hello Starling- The Lateral, 6 5/8 Inch (152290) part # 4600-2290 is the correct part for your TA-60.
Reply
I have an old Purex Sand Filter model SFSM-30. Will the 6 5/8 inch laterals fit?
Reply
Hi, Dave. Based on the info I found the SFSM-30 is now the TR100 filter. You will need to use the 9-1/2" Lateral - 152202.
Reply
I have an Old Heldor SM-40 or 50 (I cant remember off the top of my head)
Do you know what Laterals work?
Reply
Hi, Bryan. Based on the info I've found, this Lateral - 152290 is the correct replacement for the Heldor SM 40 and 50 model.
Reply
Good morning. I have the aquatech sand filter. Model at-50. Is this the right site to looking at for replacement laterals. Thank you for any help you can give
Reply
Hi Jerry, Could you send us a few photos of your filter? A close up of the label on the filter and a wide shot of the filter? To supply photos simply click the reply link below and upload your photos. Once we get any of this information we can make the proper recommendation.
Reply
I have a pureflo sand filter. I believe Pentair bought them out. Can I use this lateral as a replacement?
Reply
Hi, Joel. Yes, this Lateral, 6 5/8" - 152290 is compatible with the PureFlo Sand filter.
Reply
Pentair PF-35 Sand Filter.
Will this lateral fit ?
Reply
Hello - yes the Filter Lateral, 6 5/8" - 152290 is compatible with the PacFab PF Stainless Steel PF35 & PF50.
Reply
I have a Triton II TR-60 installed in 2011. Is this the correct lateral?
WILL THESE FIT A TAGELUS TA 60D
Reply
Hi Terry, it depends upon how old the filter is. The older TA60D filters (manufactured before May 31, 2007) use the Pentair Sand Filter Lateral, 6-11/16", Single - 152290. The newer ones manufactured after 6/01/2007 use the Pentair Extra Long Lateral Replacement For Pool and Spa Sand Filter, Single - 150085.
Reply