i need the correct o ring that goes with this cover, i have been given the correct diameter but was too thick around and made putting cover back on difficult
Reply
Hi, The Predator/Clean and Clear Tank O-ring (447) will be the correct o-ring for the 50 & 100 Sq Ft Lid After 11/98 (178553).
Reply
(178553)Hello. I have ? Thanksa really old top and from what I see, the top has a serial number (178555) would this top work for my model? Thanks
Reply
Good day, yes the Lid, 50 & 100 Sq Ft, Almond After 11/98 (178553) would be the replacement needed for your model.
Reply
I need the tank itself.
Reply
Hi, Richard. To locate the lower bottom tank, see the part listing for Pentair Clean & Clear/Predator System.
Reply
Will this lid fit my Pentair Model CC100 filter? I have leaks and pin hole leaks in the top lid. Thank you
Reply
Yes, this lid is the correct replacement for the Pentair Clean & Clear 100.
Reply
Hi This looks like my lid but I want to make sure. My lid has cracks and is leaking but the rest of the filter is good. It has several numbers.
The Pentair sticker says p/n 178555 REV E and the Serial number is 0194289080340p with another number p/n 160316 FLT CNC 100sf? Is this the correct top?
Reply
The lid on our pool filter is cracked, it is a Pentair. The diameter of our filter is 12” height without to top of canister, 33 inches to the top of the canister and 37 inches to the top of the relief valve.Is this the replacement lid? If so does it come with the replacement gasket? Do you have the entire filter available?
What is your return policy?
What is the price of the lid? The entire filter if available?
Reply
Could you send us a few photos? A close up shot of the label on the side of the filter as well as wide shot showing the complete filter. To supply photos simply click the reply link below and upload your photos. Once we get those photos we can make the proper recommendation.
Reply
I have developed a pinhole leak in the dome of my filter. I believe the part number is 178744 (Rev A) Can I replace it and at what cost
Reply
Hello Larry, yes the Pentair Pool Products Lid, 50 & 100 sqft, Almond (After-11/98) - 178553 would be the correct replacement.
Reply