what is the length,width, and height of this lid.?? also what does after 11-98 (178561) mean.??
Reply
Hi Richard - This lid Measures 13-1/2-inches Tall by 12-1/2-inches wide by 12-inches long. "After 11-98" refers to that this lid works on Pentair Clean & Clear, Predator or EasyClean Filters manufactured after November 1998.
Reply
Will this lid fit P/N 178555 Rev E
Reply
Hi, Based on the p/n 178555 the 50 & 100 Sq Ft, Almond Lid After 11/98 (178553) will be the correct size lid.
Reply
Does this lid have a warranty?
Reply
This lid does not have an implied warranty outside of our return policy. You can click on the link to view the Return Policy if you have additional questions.
Reply
Does this fit the 178555 rev e? I cannot find that part # anywhere!!!!
Reply
Hi, I was unable to confirm, however, if you can provide the dimension of the cartridge we can locate which Lid you'll need.
Reply
It's definitely the right part but the old base is expanded just a bit... any tips on how to get it on if this is the case? I currently have a ratchet tie down strap around it and think maybe i can squeeze it in slightly... or do i need a new oring?
Reply
Hi, Tricia. Remove the o-ring to see if the lid would fit onto the base. If it does, lubricate the o-ring to see if it will now fit. If it does not, measure the o-ring to make sure it's a 1/4" thick. If not, replace the Body O-ring - 87300400.
Reply
Will178561 replace Pentair 178555 REV C MODEL CC75 filter cover and also what's the PN for a pressure gage for the cover and cost. Thanks
Reply
17-110-1100 Pressure Gauge,Pentair,1/4"mpt,0-60psi,Bottom Mount,Adj Face
Reply
I'm guessing this would work, but would appreciate confirmation that this lid would do for P/N 178555 Rev B, items punched are 01 A clearance to remove top 68
Hi Heather, Yes this is the proper lid for the filter shown in your photo. We do have this lid in stock ready to ship!
Reply
Would this work for mt pentair ecde60 filter?
Hi Lynn, yes this is the correct filter lid for the Pentair Easy clean model filter manufactured 11-98. If you are not sure of the date of manufacture then you will need to locate the serial number and either provide that to us or to Pentair to confirm when it was manufactured.
Reply
Does this lid fit #160318 base
Reply
Yes, this lid does fit the model Pentair Clean and Clear 200 sq. ft. 160318 manufactured after 11/98. You may need to provide the manufacturer Pentair with your serial number to confirm the date of manufacture.
Reply
how quickly can i get this part shipped? would pay for overnight delivery
Reply
As of this morning (July 1) the lid is in stock. If ordered today it would ship out either today or tomorrow. Typically it takes 3-5 business days for delivery.
Reply
hello trying to match up pentair 178555 rev e thank you
Reply
Hello Nicholas. The Pentair part number 178555 cross-references to the Label, Lid for the Pentair Clean & Clear Cartridge Filter, Predator System and does not identify the specific Clean & Clear Model. Attached please find the Clean & Clear exploded parts diagram for part identification reference. Pentair Clean & Clear Attached please find a reference for the available Pentair Clean & Clear Filters - Complete. Pentair Cartridge Filters
Reply
Hi I'm looking for the correct gasket for this
Reply
Hello Steve. The Predator/Clean and Clear Tank O-ring is the tank lid O-ring for the Pentair Clean & Clear Filter Series. The 0-ring fits tightly around the filter base. Please be certain to lubricate the O-ring prior to attaching the lid. Magic Lube O-ring Lubricant 1 Oz. Teflon
Reply