Will this lock ring fit a LS 70 filter?
Reply
That is the correct lock ring for the Jacuzzi LS40, 55 and 70. Here is the Parts Breakdown for the Jacuzzi Landslide DE Filter.
Reply
I have the jacuzi splash pac with the black nut ring that goes on a gray body. Should there be a gasket in between. The locknut and body? It leaks but i dont remember having one. .I have an O ring inside the rim
Reply
Marlene, There is a Tank Body O-ring that goes between the body and lid and then is secured by the Lock Nut.
Reply
I have the CFR 100. When my pump came on this morning it blew this lock nut apart. The system is at least 10 years old...probably closer to 20. Anyway, there is an O-Ring on the body, but I do not see any other gasket in the cover or the body. Is the lock Nut all that I need to get the unit back on line?
Thanks.
FM
Reply
As long as this is the only item damaged then that is all you would need. Please inspect the lid, and the body for any cracks. You may also want be sure that that lid o-ring is not stretched, cracking or bleeding. Lastly please make sure that the system is set up correctly by gallons per minute ratings between the pump and filter. If the pump is too strong for the filter, that potentialy could have caused that ring to be blown off.
Reply
Does this Lock Nut fits with Jacuzzi CFR Cartidge Filter 150 square feet?
Thanks!
Reply
Hi Joseph. According to the Jacuzzi Bros site this is the replacement nut for the CFR 50, 75 and 150. Thank you for the inquiry.
Reply
Will this lock nut fit my Landslide LS 70 filter and does it come with the lock tab that is yellow in your description? Mine is a black tab.Thanks, Tom
Reply
Hello Tom- Yes the Lock Nut (jacuzzi Filters) (42285007r000) 4666-10 will fit your Jacuzzi Landslide, and as mentioned in the description it does include the yellow tab.
Reply
Hi I looking for star rite posi clear lok ring, pxc75 , pxc95, pxc125, pxc 150 Do you have this part ? thanks
Reply
Hi Carlos, The lock ring for the PXC filter is only sold as an assembly with the lid. Here you may view the Sta-Rite PXC Lock Ring Assemblies
Reply
Is this the outside measurement of part 4666-10.? Let me know looking for that part
Reply
Hello Robert- The outside measurements for the Lock Nut (jacuzzi Filters) (42285007r000) 4666-10 is 13-5/8" AT THE BOTTOM and 13-1/8" AT THE TOP.
Reply
I cannot figure out how to open the yellow Lock Nut on a Jacuzzi filter. It is an older filter and I cannot get the top off. I pulled, twisted, pried and am about to resort to a hammer attack. Is there a trick . I do not want to break the lock. Help Too dark for pictures.
Reply
Hi, Betty. Depress the locking tab. Then, using both hands, grasp the large locking ring at the top of the filter and rotate counter-clockwise. Continue to rotate until the ring is free of the filter and set aside
Reply
I assume that the above lock nut is compatible with my CFR 100 (see label attached)
Is this lock nut a different size than one compatible with a jacuzzi cartridge filter made 1988 or earlier
Thanks
There does not appear to be a different style of locknut depending on the manufacture date of the filter.
Reply
Does this locking nut fit the Jacuzzi EW 36 DE filter. It is about 20 years old and works fine. I cannot unscrew the old one. I believe it was tightened to far. Also how do I get the old one off without damaging the filter itself?
Reply
Hello, This will be the locking nut you will need.http://www.inyopools.com/Products/07501352022590.htm
Reply
Will this lock nut fit the SHER 120, mfg date 05Dec01?
Reply
Hi William, this will not fit your Jacuzzi Sherlock Cartridge Filter. You probably want this Filter Nut - 42367102R000 instead.
Reply