im trying to find a lid o ring.. for a sherlok 120..my parts id gives a sze of 11 1/2-11 7/8 x 3/16...which is bigger than the one you have....this model is 15 yrs old. can you help parts ref # 47-0380-47-R
Reply
Tom, This is the correct lid o-ring for the Jacuzzi Sherlock Cartridge Filter. The old o-ring can become stretched over time causing it to be enlarged.
Reply
I have a Jacuzzi platinum series filter...most of the markings worn off...I need an o-ring for the main tank body...is the part #7 in the schematic universal for Jacuzzi filters? ....thanks
mike
Reply
I can not say that the o-rings are universal. I tried a couple of other site on-line and the " Jacuzzi Platinum series" all led me back to the Jacuzzi CFR & EF Cartridge. Please look at the parts breakdown and see if it resembles yours. If it does, then part number 4666-05 will indeed be the part for you.
Reply
I have a splash pak jacuzzi filter and I'm looking for a oring will part 7 on the diagram work the slash pak model # is 75ef-s1kr9-6-hk6
Please let me know
Thankyou
Reply
Hi Leo, Yes this o-ring will work on the Jacuzzi Splash Pak 75ef-s1kr9-6-hk6 system.
Reply
I have a Proline de filter. Dia is 12 inches. I am looking for the o ring that goes on top of filter before the dome goes on. I have tried a couple of o rings one was to thick the other to skinny. The skinny one is 3/16 by 8 inches. Is it leaking because I am streching the 8 in o ring? Would this one fit? . Model # 40DE-HK6-Namco. Part # is 94087871. Ser # 009946
Reply
Hi Tony, This would be the correct o-ring for your ProLine Model # 40DE-HK6-Namco, Part # is 94087871, you should have no issues with this o-ring. You may also see the Parts Breakdown For The DE40 Filter here.
Reply
I have a splash pak jacuzzi filter and I'm looking for a o-ring, will part 7 on the diagram work the slash pak model # is 100EF-S15KGT-9-6-HK6 Please let me know. Thank you
Reply
You would require this Jacuzzi 100EF O-ring.
Reply
I have a 75DE-NPUMP-HK6-NAMCO filter made by Jacuzzi. I am looking for replacement o-rings and a bleeder valve for the top of the filter. Is this the correct o-ring kit?
Reply
Hi Dan, The O-ring (O-413) will be the correct o-ring. You can find the other parts needed via the Jacuzzi Landslide D.E. Filter Parts List.
Reply
I have a Proline DE Filter. I need to replace the cover o-ring. My parts manual shows #47-0380-47-R. I believe this o-ring is a duplicate replacement. Please confirm. Thanks
Reply
Hi Jim, yes you are correct this the proper replacement o-ring for a 47-0380-47-R o-ring which is used on a Proline DE Filter.
Reply
I have an older SherLok filter. Most of the information is faded, I am needing the o ring on lid. Are there more than one SherLok filter. What I can read says model# Sher-80. Can you help ?
Reply
Hi Sue, there is only one Sherlock filter, and you would require the Jacuzzi Sherlock Tank O-Ring listed on this page.
Reply
I have a "Proline DE Filter, 75DF HK6 - NAMCO, Jacuzzi 94087889". What is the correct replacement for the top cover O Ring?
Thank you.
Reply
Hi Dana, This Tank O-ring will fit the Proline 75DE-HK6 filter.
Reply
what is the correct 0-ring for jaccuzi sherlok 160 lid
Reply
Hi. Yes, this O-ring will fit the Jacuzzi Sherlock Cartridge Filter.
Reply
I have a 75DE-HK6-NAMCO Jacuzzi DE filter unit. It is about 16 years old and I need a new O-Ring for the top cartridge area. I think this one will work, bu want to make sure. Thanks
Hello i need replacement grids for my 75DE-HK6-NAMCO filter. I've attached a picture of the model as well.
Hi Oscar, You will need the Grid Cassette Assy - 42355800R000 for your model filter.
Reply
I decided to order the assembly unit you recommended 42355800R000 it is the WRONG replacement part. I've attached pictures. Before i ordered i had asked that if i was sent the wrong item and it was recommended by you i would get a return shipping label. I did send you the serial number and model in my previous post so i could get the right part, but something went wrong. I still need the right part but i need ti return this one i just received back 1st.
Hi Juana, I'm sorry we reccoended the wrong item, could you let us know the height of your old grids so we can work on getting the proper grid assembly?
Reply
I cant buy individual grids?, i only have 2 that need replacing
Reply
Yes the individual grids can be found here under key # 10 Jacuzzi Earthworks Parts EW75
Reply
I am looking for the exact same ring! Any luck?
Reply
Does this part fit proline model 75DE-HK6-Namco and also the Key 6 part
I just want to know if key 5 and key 6 on the diagram work. thank you
Reply
Yes both parts work with a Namco 75DE-HK6 Pool Line Filter.
Reply