I have an American Products Predator Cellular Media pool filter. It never had an O-ring. I can't find the correct size anywhere. The serial number of filter is 017875. and model media # 56408100 / filtration area 75 sq. ft./ replacement part no. 59054100. I would appreciate assistance in finding the correct size for this locking O-ring. Thank you in advance.
Reply
Hi Maria, The Predator/Clean and Clear Tank O-ring (447) would be the correct tank o-ring for your filter.
Reply
I have an old Purex 4000 Series Molded D.E. pool filter and it is leaking on the top where the pressure gauge is. Does this O-ring fit under the gauge to help keep it from leaking or is there some other type of seal replacement for it?
Reply
Hi, LB. This o-ring will not fit under the pressure gauge. There is no o-ring that is placed under the pressure gauge for the Purex 4000 Series Filter. Check out the Purex 4000 Series Molded D.E.
Reply
I have a triton Pentair 2000 pool filter. I would lik to replace item 14 o ring. Can I do this without removing the top[ bolts? Must I have to drop the backwash valve assembly?
Hi, Tony. You can replace the Collar O-ring by removing the grid assembly and manifold. without removing the valve.
Reply
Trying to locate the O ring for a Starbright sand filter, the SF 35 that seats under the multi port valve. Old one was crimped during a previous maintaintence job. Now sand and fine dirt comes back into the pool. This filter is dated Feb.2, 2012 - upright, PIN SBSD0040DE1160, See picture
Hello Lou. The O-ring, Valve Body - 272541 sits between the filter tank and multiport valve on the Starbright Sand Filter model SF 35. Attached is the Pac Fab/Pentair Sand Dollar (Starbright) exploded parts diagram for additional reference.
Reply
