I need 2 o rings for the model SM20-2 multivalve but I dont see the correct one shown in pictures. The one I need is about 2.5 to 3 inches in diameter and about the thickness of a cooked piece of spaghetti. The ones you have displayed are the slightly smaller and thicker diameter and very wide diameter o ring for the interior of the valve. Please advise.
Regards,
Reed
Reply
Red, The Valve Adapter O-ring (4620-529) that goes on the bulkhead may be what your looking for.
Reply
I have the Purex Triton Model TM-22. I am looking for the o-ring that goes underneath the top of the cover. Will this o-ring work?
Reply
Good Morning Nick Guerra, The model number you gave us is for the multi-port. Is your filter a sand or cartridge and do you have the series or sqft or the model number of the filter itself?
Reply
hi...i need to replace the spyder gasket as well as the o-ring cover for a valve purex triton (filter) model SM-20-3 ....what do you recommend me to buy?? I will need the silicon tube also....
Reply
Good morning Jorge, You are looking for PacFab MPV 2" Tune Up Kit (NO SPRING) - APCK1069
Reply
I have the PENTAIR TOPVALVE Model SM-20-3. I am looking for the o-ring that goes underneath the top of the cover. Will this o-ring work?
Reply
Yes, this is the correct lid o ring for your model valve.
Reply
Is this the replacement ring for Jandy cl model filter tank or part #R0357800
Reply
Hello Stan. The Jandy Filter Tank O-ring - R0357800 is the correct tank lid o-ring for the Jandy CL Series Cartridge Filter. Attached please find the Jandy CL Series Cartridge Filter exploded parts diagram for reference.
Reply