Hi,
Is this a 3" split nut? I need one to have on hand.
If so is it flexible enough to get over the pipe?
Thanks,
John T
Reply
John, No this is not a 3" Split Nut but we do carry a split nut which accomodates 2" pipe and the nut itself measures 3-1/4" in diameter by 1-1/2" Thick. This item secures a top mount backwash valve to a Waterway Sand Filter and has the following dimensions 10" x 9.5" x 1.4"
Reply
if the ring leaks after replacing the o ring and tightening the split ring back up and seems to leak more and more is it a pressure problem
Reply
Hi, It's not a pressure problem, it could be that the o-ring has been installed incorrectly or need to be lubricated and or replaced.
Reply
Does this ring replace the proline 06611RO102
Reply
John, I believe the Lock Ring you are needing is this 06611R0204 Proline Sand Filter Lock Ring
Reply
Does this ring replace the proline 06611RO102
Reply
Hi, John. The number provided cross references to the Standpipe Holder - 066120102 which is used on the Astral 1800 Series. The Valve Lock Ring - 06611R0204 is what you'll need.
Reply
Is there a trick to getting this over the filter top? I cant pull it apart enough
Reply
Hello, You should be able to put it right on and open the clamp a little so it fits. I can confirm if you have purchased the correct one. What is the brand and the model of the filter?
Reply
Can you tell me what size belt and nut it is?
Reply
Hi Aaron, the nut itself measures 3-1/4" in diameter by 1-1/2" Thick. This item secures a top mount backwash valve to a Waterway Sand Filter and has the following dimensions 10" x 9.5" x 1.4"
Reply