?     Asked on 10/22/2015by Inyo Visitor

I've got a Sta Rite 70TX with a stainless steel cover. Is this tank a direct replacement? Thanks in advance for your help.
 Reply

A  Answered on 10/22/2015 by InyoPools Product Specialist Lennox H.

Hi, The Tank Rep Kit (25010-9203) will replace your old 70TX stainless steel cover.
 Reply


?     Asked on 3/27/2016by Marko

I have posiflo 70TXR I need to replace the stainless steel tank. What else do I need or is this everything ?
 Reply

A  Answered on 3/28/2016 by InyoPools Product Specialist Hector F.

The only other parts I would recommend to replace would be the o rings. Here is the parts diagram for the 70TXR filter. Be sure to check the condition of the clamps and air relief.
 Reply


?     Asked on 7/25/2016by Dan

I have a posit flow 135 txr cartridge filter I need to replace what are the right parts?
 Reply

A  Answered on 7/28/2016 by InyoPools Product Specialist Lennox H.

Hi Dan, Unfortunately, The replace tank are no longer available but other part are, click link "Sta-Rite Posi-Flo Stainless Cartridge Filters Parts" for available parts.
 Reply


?     Asked on 7/29/2019by Mary E Perlot

I have a Posi Flo filter with P2RA pump from the 80's. The stainless steel tank is leaking from around the gauge. What are more options for repair?
 Reply

A  Answered on 8/1/2019 by InyoPools Product Specialist Matt S.

Unless a faulty gasket is causing the leak, the only other source would be a cracked gauge port which can only be fixed by replacing the tank top.
 Reply


?     Asked on 8/24/2020by Harry Robinson

does the replacement have the strap in the top like the stainless did? Part # wc19 - 44
 Reply

A  Answered on 8/24/2020 by InyoPools Product Specialist Lennox H.

Hi, Harry. The Strap was included in this kit, however, this kit along with the strap is no longer available.  
 Reply

  • Commented on 8/24/2020 by Product Owner

    So do I need to shop around for a different filter?
     Reply

    • Commented on 8/27/2020 by InyoPools Product Specialist Lennox H.

      Harry, Yes, you will need to replace the entire with a new Filter System
       Reply


?     Asked on 7/7/2021by chuck farrell

I have a posi-flow 70 txr stainless tank that has a couple of pin hole leaks in the top. Do I need to replace it asap or do I have time? Do you have the stainless tank or do I need to replace it w/ something else?
 Reply

A  Answered on 7/7/2021 by InyoPools Product Specialist Patrick P.

Hi Chuck, Yes I would suggest replacing ASAP, unforutnatley the lid for your filter is no longer available. I would suggest a complete new filter, something like this Hayward C9002 Cartridge Filter.
 Reply