?     Asked on 5/10/2019by George. Gerber

Will this base fit my plm200
 Reply

A  Answered on 5/10/2019 by InyoPools Product Specialist Lennox H.

Hi, George. Yes, this Tank Shell Lower Half - 27001-0009S will fit your PLM200 model filter. 
 Reply

  • Commented on 5/11/2019 by Product Owner

    Thank you will order next week
     Reply

    • Commented on 5/13/2019 by InyoPools Product Specialist Patrick P.

      Thanks George!
       Reply


?     Asked on 5/27/2019by Victor

Will this lower half fit a PLM150 .Spin on retainer .
 Reply

A  Answered on 5/29/2019 by InyoPools Product Specialist Patrick P.

Yes this lower half does fit the PLM150
 Reply


?     Asked on 7/30/2019by Michael Nadeau

Will this tank shell lower half 27001-0009S, fit my Sta-Rite system 3, model PLM 100 upper half? Also which tank o-ring do I need to seal the tank halves?
 Reply

A  Answered on 7/30/2019 by InyoPools Product Specialist Lennox H.

Hi, Michael. Yes, this Lower Tank Body - 27001-0009S will fork with the PLM 100 model filter. You will need the Cord Ring (3/97-Current) - 27001-0061S
 Reply


?     Asked on 8/30/2019by Aaron

Does this fit the Sta Rite Modular 3, model S7M12? Thanks!
 Reply

A  Answered on 8/30/2019 by InyoPools Product Specialist Lennox H.

Hi, Aaron. The Tank, Lower Half - 24850-0102S is the correct one for your model filter. 
 Reply


?     Asked on 5/17/2020by Mary muellman

Does this lower tank fit all the different System 2 models or is each PLM 125 and PLM 150 a different size lower tank? Thank u
 Reply

A  Answered on 1/4/2021 by InyoPools Product Specialist Hector F.

Hi Mary, this lower tank shell is compatible with all Sta-Rite PLM series filters. 
 Reply


?     Asked on 5/26/2020by Mike

Can I use this lower tank to replace a sta-rite plm 150 with, and also would the top half of that plm 150 fit this lower half
 Reply

A  Answered on 12/29/2020 by InyoPools Product Specialist Hector F.

Hi Mike, yes this is the correct bottom tank for the Sta-Rite PLM 150 model filter. It should fit with the lid as well unless it has contracted too much over time due to pressure fluctuations. I suggest replacing the lid o ring as well as that should help for the two halves to seal. You will need to know the date of the manufacturer to confirm which o ring that you need. You can use the serial number and contact Sta-Rite to confirm that. The two o ring options are listed at key number 4 on this parts diagram
 Reply


?     Asked on 4/1/2022by Michael J. Olack

Will the bottom half replace the PLM 300 and if so what O ring would be needed? Thanks Mike
 Reply

A  Answered on 4/1/2022 by InyoPools Product Specialist Craig C.

Hello Michael.  The Pentair Pool Products Tank Shell Lower Half 27001-0009S is compatible with the Pentair/Sta-Rite System 2 PLM 300.   The tank lid o-ring 27001-0061S would be correct if the filter's manufacture date is 3/97 to current.  Cord Ring (3/97-Current) - 27001-0061S  If the filter was manufactured prior to 3/97 the correct o-ring would be 27001-0060S.  Cord Ring (Pre-3/97) - 27001-0060S   Attached please find the Sta-Rite System 2 exploded parts diagram for reference.  Sta Rite System 2 MOD Media & MOD D.E. PLM & PLD
 Reply