Would this fit on my pump mother model yy71L4x-2/4 or
E302056
Reply
Hi Cheryl, I was not able to find any info on your pump model, so I'm unable to confirm if this trap will work. If you can send us photos of your pump we can verify it.
Reply
I cannot get the top off of this trap. Several other people have tried also. Is there a trick to this? Is there a special tool????
Thank you
Reply
Hi Jackie, To remove the lid use the tabs on the lid to turn the lid to the left. If you're having issues then you have have to use more force. There is not a special tool for this strainer housing.
Reply
the threads on my pump are 2 5/16 inches outside to outside will this buttress fit my pump
Reply
Hi. The OD of the suction and discharge port are 2-3/8 inches. If you can provide me with the model of the pump you have I can confirm if the Strainer assembly will fit.
Reply
will this fit 1N11MB waterways pump
Reply
Hi, Flint. Yes, it can. However, the Waterway Pump Strainer Trap to show you how to measure your strainer to make sure you get the correct one.
Reply
Would this fit a hp 1.5 spl pump MOTOR MOD S48AA11A79 SER 04717CH?
Reply
It may, however, we would need to confirm the make and model of the front pump housing that the motor actually attaches to in order to confirm. If you are unable to confirm that model you can always send us a few images of that pump housing to upload@inyopools.com so we can confirm for you.
Reply