What is the best way to install? take apart or leave as one unit???? The always leaks , like this one not to....
Reply
Hi, The easiest way to install is separate it leaving the locking nut in place, then connect the locking nut to the other side.
Reply
Does the o-ring come with the pump side union half (glued in the groove or separate) ? I tried to remove the old o-ring, it was leaking, and it appears that it was glued into the o-ring groove. I could not remove the leaking o-ring without scratching the groove and leaving pieces of the o-ring in the union groove.
Reply
Hello, Jerry. The O-Ring/Gasket (SPX1425Z6) and (SPX1485C) should not be glued in. It may corroded by chlorine or years of use.
Reply
Do you have this union with a threaded port for an in line chlorinator?
Reply
Hi Philip, If you have a Hayward Chlorinator then you will require this Hayward Chlorinator Union Kit.
Reply
Will this fit Model DRQD1504 pump? Suppose to be replacement for Hayward pump, 2hp
Reply
Hi. I was unable to find any specific info on the DRQD1504 model pump to confirm if this union will work.
Reply
Does this union include a flow control switching fro d.e. filter to Cartridge but noticed my D.e. filter has a flow control washer. thanks
Reply
Hi, Roger. This union does not have such a feature. That part is specific to the D.E. Filter you have.
Reply
