Does this cap fit on a 22" sand filter tank?
Reply
This will depend on the specific model of the filter. We would need to double check for you and cross-reference that. If you can call in providing the model filter or you can email us some images of the filter at upload@inyopools.com if you are not sure, then we can look into this for you.
Reply
Part 602-5301 broke on our Water Way filter system. We found a new one in town but the threads are fine; the one that came with the package we bought from Inyo Pools has wide threads. Is there a different replacement part that still has this number on it?
Reply
I have a Millinium 22" sand filter SFM027664. The drain cap and washer/gasket have been misplaced. It has course threads. the outside dimension of the drain port I believe is approximately 2 1/4" (including threads). The only other numbers I have found on the tag is 808-0149-M.0609. Will this cap fit my drain?
Hi, Rick. This is the correct Drain Cap for your model sand filter.
Reply
I have a Millenium 19” in-ground series filter. Only numbers I see are SFM030874. The drain measures 2” diameter. Is this the correct drain cap?
I need the sand filter drain plug is this it
This is the drain plug cap for the Waterway Millennium and fits your filter. You will probably also need the Waterway Drian Screen and Waterway Drain Screen O-Ring
Reply