How can I tell if this is the size I need? Mine has a crack and a leak at the pressure release hole. serial # 550-0221 says 125-200 sq ft. the filter is a pccf-200. Does it come with the ring lock? Thanks
Reply
The PCCF-200 would indicate you have the 200 Sq. Ft. Model and this would be the correct lid and it does come with the lock ring.
Reply
The lid has a crack and the Serial number if PCC-23214. Is there a way to seal the crack until we can order a replacement? Which of the models would need to be ordered as I don't see the serial number listed.
Reply
Hello, What model of pump do you have? We cannot run serial number, can you provide a model number for the pump to better assist you.
Reply
I have the Waterway PCCF-200. Mine has a pressure gauge but notice this one does not. One of the genius fly by night people super glued the valve and plugged the air pressure release hole. So I need a new lid only. Would this be the correct one? And if so, what about the gauge?
Reply
I have the PCCF 200. The locking ring cracked allowing a lot of water to flow out. Can just the locking ring be replaced and if so, can I just purchase a new locking ring instead of the whole top section
Reply
Hi, Dom. You can use the Lock Ring Assembly - 550-0701B if your can was manufactured after 2015.
Reply
Does this filter lid & ring fix my filter pwwpc150b
Reply
Hi Wilfredo, Based on the part # you provided we show you have the Waterway Pro Clean 150 Filter and this lid is for the Waterway Pro Clean 175 & 200 filter. Based on your part # you will require this Waterway Pro Clean 150 Filter Lid & Ring please double check your dimensions against these Waterway Pro Clean 150 Filter Lid & Ring Dimensions
Reply
my dimension is L44"- W16" and my filter size is pwwpc150b
Reply
Thank You! You will require this Waterway Pro Clean 150 Filter Lid & Ring
Reply
is this the same as a haywood c1750?
Reply
Hi there,No, this lid is for a Waterway filter. The correct lid for your Hayward C1750 is the following...Filter Head W/ Vent, C1750/C1900 - CX1750B
Reply
Hi, can you tell me if this lid will fit? My serial number is PCP- 77875. Thank you!
Thank you for contacting Inyo Pools, Unfortunately, that is a serial number. I need a part number Like PCCF--150 or PCCF-175. Or if there is a part number on the cartridge itself
Reply