?     Asked on 5/11/2015by Inyo Visitor

I have the swim n play FC100 model cartridge filter unit & need the lid-O-ring for both the bottom section & top cover. My specific question here is will this lid-O-ring fit my model # FC100?
 Reply

A  Answered on 5/11/2015 by InyoPools Product Specialist Lennox H.

No, This o-ring will not fit your FC100 cartridge filter. Your FC100 crossed reference to the Waterway Clearwater Cartridge.
 Reply


?     Asked on 3/1/2016by mike

will this oring fit for a c1750 cartridge?
 Reply

A  Answered on 3/1/2016 by InyoPools Product Specialist Lennox H.

Hi Mike, This O-ring will not fit a C1750 filter. The Filter Head O-ring (CX900F) will be the correct lid o-ring.
 Reply


?     Asked on 6/18/2016by wayne

I have a waterway proclean pccf-125, 44 x 16, 817-0125p. I have had leak problems where the top meets bottom. Your pix looks like mine but there was never an o-ring included. Are you sure this model needs one, and which? thanks
 Reply

A  Answered on 6/26/2016 by InyoPools Product Specialist Lennox H.

Hi Wayne, The PCCF filter need a Lid O-ring or else it will leak once the tank fills under pressure. If it's leaking now then you will need to replace it.
 Reply


?     Asked on 6/28/2016by eric

Will this fit my Proclean PCCF-100 System Currently, I do not see a seal, but the picture shows a seal.
 Reply

A  Answered on 6/28/2016 by InyoPools Product Specialist Matt S.

Yes, this lid o-ring will fit your WaterWay PCCF100.
 Reply


?     Asked on 3/12/2019by Arthur

Do you carry a replacement lid ring for a PCCF 075?
 Reply

A  Answered on 3/13/2019 by InyoPools Product Specialist Lennox H.

Hi, Arthur. This is the correct replacement Lid O-ring - 805-0448 for the Waterway PCCF 075 filter. 
 Reply


?     Asked on 4/19/2019by Eric

Will this gasket fit the pro clean 200sqft filter system/lid? My filter doesn’t have a gasket and I’m not sure it ever did but it leaks at start up and shut down from the lid ring and I think this is why.
 Reply

A  Answered on 4/27/2019 by InyoPools Product Specialist Lennox H.

Hi, Eric. Yes, this Lid O-ring - 805-0448B will fit the lid of the Waterway Proclean 200 sqft Cartridge Filter
 Reply


?     Asked on 4/19/2019by Joyce A Seymour

Does this O-Ring fit Pro-Clean PCC-41736
 Reply

A  Answered on 4/19/2019 by InyoPools Product Specialist Michelle B.

Hello, Yes, this will be the correct part for your pro-clean filter.
 Reply


?     Asked on 4/26/2019by MarioN

What lid-o-ring should I get for the Haywood C-1200 filter?
 Reply

A  Answered on 4/26/2019 by InyoPools Product Specialist Lennox H.

Hi, MarioN. The Filter Head O-ring - CX900F (OEM), O-240 (Generic) is the correct size for the Hayward C1200 cartridge. 
 Reply


?     Asked on 10/21/2020by Larry Jarvis

will this o ring fit my pccf200 with a c-8417 filter
 Reply

A  Answered on 10/22/2020 by InyoPools Product Specialist Hector F.

Hi Larry, yes this is the correct lid o ring for your model Waterway PCCF-200 filter. 
 Reply