I need parts for my filter valve. When I look at the filter parts breakdown, it gives me different choices. How do I know which one is the one I need?
Reply
In order to locate the correct parts we will need to know the model number of the filter valve. Two identical filters can have two different valves. Typically the valve model will be located on the label of the valve. If there is no model number on the valve, you can try to see if there are any part numbers on the valve itself. Once you've located you valve model you can check out our >Filter Valve Parts.
Reply
I have a Hayward SP071620TFV. It is a top mount multi-port variable flow valve for a 500lb sand filter. The head is cracked so I need to order a replacement. I only see SP071620T as a replacement part. Is that compatible with my model?
Reply
Yes, this valve is the correct replacement.
Reply
Asked on 8/4/2019 by jp i NEED TO REPLACE A SP071620TFV S# 211214090010750032 PLEASE ADVISE AS TO THE EXACT REPLACEMENT A Answered on 8/4/2019 by InyoPools Product Specialist Lennox H. Hi, JP. Yes, this valve is the correct replacement.
Reply
Need a replacement for Hayward vari-flow valve original SP0715G11M, 1st replacement SP-716-A13. What is the current part?
Reply
Hi. I will need to know the filter tank model in order to confirm which valve you will need.
Reply
I need a Polaris QT Spa Blower 1.5 HP 240V Quiet | 1-470-02. Is it available or discontinue? If it's discontinue then any suggestion
Reply
Hi Ashraf, We would suggest this 1.5 HP 240V Silencer Air Blower as a replacement for your Polaris QT Spa Blower
Reply
Hi, I have a Hayward S3107 Pro series sand filter that was set up with a Vari-Flo valve that has 1 1/2 " piping.
The pump is a 2 HP Superpump with 2.0" fittings.The plumbing is reduced from the 2.0" to 1.5" to accommodate the smaller Vari-Flo. Its a big pool and the intakes and returns are all 2".
I am about to change the 500 lbs of sand. Is it possible to swap out the filter laterals, risers and the vari flow valve with 2" equipment using the same S3107 filter? And finally is it worth it?
Reply
Here is the parts breakdown for the Hayward S310S Pro Series.Click here for the laterals As far as is it worth it. It is if your filter has stopped performing properly or if they are worn out.
Reply