?     Asked on 1/11/2012by Guest

What is Service Factor?
 Reply

A  Answered on 1/11/2012 by InyoPools Product Specialist Patrick P.

Service Factor(SF) is a multiplier that when multiplied by the horsepower of the motor indicates the total permissible horsepower loading that may be carried when the motor is operating at rated voltage and frequency. The most important thing to remember when replacing a motor is that the replacement motor's horsepower times its service factor must be equal to or greater than the original motor's horsepower times its service factor. The Service Factor rating can be found on the motor label. See Step 4 of our How to Read a Pool Motor Label guide.
 Reply


?     Asked on 12/9/2014by Inyo Visitor

Will this motor fit the Pentair Intelliflo 4x160 (011018) pump?
 Reply

A  Answered on 12/10/2014 by InyoPools Product Specialist Robert M.

Yes, the 350105S motor will fit the Pentair Intelliflo 4x160 (011018) pump.
 Reply


?     Asked on 10/18/2015by chris gonser

I purchased a Pentair Pump Model No. 355007 in 2012 and the motor needs to be replaced. Electronics are all still functional. What replacement motor should I purchase?
 Reply

A  Answered on 10/20/2015 by InyoPools Product Specialist Lennox H.

Hi Chris, The 3.2KW PMSM VFD Motor (350105S) would be the correct motor.
 Reply


?     Asked on 9/2/2016by Jay Patel

I have Pentair Intelliflo vs + SVRS pump which needs a motor replacement. The pump was installed in 2009. The motor is 3.2 kW, 230 volt. Can you suggest correct part number if you carry in your stock and cost, shipping to 77479 zip code. Thank you, Jay Patel
 Reply

A  Answered on 9/16/2016 by InyoPools Product Specialist Stacey M.

Hello Jay, 5074-34 motor is replacement for you, we do have in stock and for ground 3-5 business days it is free shipping, for 459.99. I would highly recommend pump seal and orings found Pentair IntelliFlo VS 3050 & VS + SVRS Parts.
 Reply


?     Asked on 4/23/2017by bob

my pool motor shows a part number of P?N 353114.E I have the PENTAIR INTELLIFLO 3 hp 1.32 sf 3.96 sfhp KW 3.2 Amp 16. which would be the best replacement motor
 Reply

A  Answered on 4/26/2017 by InyoPools Product Specialist Lennox H.

Hi, Bob. I was not able to cross reference p/n 343114 to any Pentair parts. This motor will work on the Intelliflo VS Pump.
 Reply


?     Asked on 2/24/2018by Hal

I have a #355007 Variable speed motor that has the front aluminum mount wasting away, do you recondition these motors? Looks like the mount holds the font bearing of the motor.
 Reply

A  Answered on 2/26/2018 by InyoPools Product Specialist Kevin G.

Hello, unfortunately, we do not recondition motors. 
 Reply


?     Asked on 5/13/2018by A/J

Hello, I have the Pentair Intelliflo 4x160 and keeps shutting down randomly. The led flashes 9 times meaning a Voltage issue-Can it be the Pump that went bad or maybe the Computerized Drive on top? Thanks..
 Reply

A  Answered on 5/13/2018 by InyoPools Product Specialist Lennox H.

Hi, AJ. If you've confirmed that the issue is not caused by the input power supply, the issue could be the drive. You may have to do some troubleshooting with Pentair Tech Support @ 800.831.7133 to confirm.
 Reply


?     Asked on 1/9/2019by Todd Martin

What type of motor bearings does this need, 3 hp, 1.32 service factor 3.96 sfhp. Model number 011018

 Reply

A  Answered on 1/10/2019 by InyoPools Product Specialist Lennox H.

Hi, Todd. We're unable to provide you with the replacement bearing for this motor. 
 Reply


?     Asked on 3/11/2020by Curt

What’s the replacement motor for this unit?

 Reply

A  Answered on 3/12/2020 by InyoPools Product Specialist Lennox H.

Hi, Curt. This Motor 3.2 kW PMSM VFD - 350105S is the correct replacement for your motor.
 Reply


?     Asked on 9/29/2020by kumar

whatz the warranty on this product ?
 Reply

A  Answered on 10/28/2020 by InyoPools Product Specialist Joe S.

Hello Kumar, the Motor 3.2 kW PMSM VFD - 350105S has a 60-day warranty if a homeowner does the install 1 year if done by a licensed pro. 
 Reply


?     Asked on 4/20/2021by Christo

will this motor fit a 011012 VF pump?
 Reply

A  Answered on 4/20/2021 by InyoPools Product Specialist Matt S.

Yes, the 350105S is the correct replacement motor for the Pentair IntelliFlo VF Variable Speed Pump - 011012
 Reply

  • Commented on 4/20/2021 by Product Owner

    Thank. and do you know if the pentair rebate applies to this part? or just a complete unit? same question with the electric companies rebate?
     Reply

    • Commented on 4/23/2021 by InyoPools Product Specialist Matt S.

      Unfortunately, I do not know. You would need to contact Pentair or your electric company to determine if the rebates are applicable to your purchases.
       Reply


?     Asked on 4/23/2021by Alex Early

I have a Pentair IntelliFlo variable speed P/N 342000 PMP SUPERFLO VS. the motor is on and spinning; but, there is no suction. should i REPLACE THE MOTOR? If so what motor? Purchased 11/3/2014. I don't know if its 2 speed or 3 speed.
 Reply

A  Answered on 4/27/2021 by InyoPools Product Specialist Matt S.

The motor may not be the issue, there could be an air leak compromising the suction force of your pump. Read these guides and complete the troubleshooting, they should give you what you need to get the pump running correctly: How To Determine Why a Pool Pump Won't Prime & How to Correct Low Water Pressure in Your Pool System
 Reply


?     Asked on 6/21/2021by John A Yanosy Jr

Des the 350105S replace the motor in the Pentair IntelliFlo VS3050
 Reply

A  Answered on 6/21/2021 by InyoPools Product Specialist Patrick P.

Yes, this is a suitable replacement motor for the Pentair VS-3050.
 Reply


?     Asked on 8/11/2021by Inyo Visitor

I want to replace my pentair single speed 340038 with a VS. Is this the right motor and if so what parts do I need to go with it for the replacement? How do I connect it to my intellitouch panel to control the speed and schedule? Thanks!

 Reply

A  Answered on 8/11/2021 by InyoPools Product Specialist Craig C.

Hello.  The Pentair Pool Products IntelliFlo Motor 350105S  is not intended as a conversion variable speed motor.   The Motor/Drive Assy 353132S can be utilized as the conversion assembly.  The impeller and diffuser from your SuperFlo could technically be used on the SuperFlo VS Motor/Drive Assembly, but will not provide the full benefit of the conversion.  The impeller and diffuser should be upgraded, the seals and gaskets replaced, the communication cable 353129Z provides the means to connect to the Pentair Intellitouch.  Attached please find an exploded parts diagram for the Pentair SuperFlo VS Pump.  Pentair SuperFlo VS Pump - 342001  The purchase of a SuperFlo VS Pump EC-342001 would provide the drop-in replacement option complete with a communication cable.
 Reply