?     Asked on 5/4/2015by Paulette

I see that the Intelliflo drive assembly I need is listed as "no longer available". Is there a replacement part for this drive assembly or am I just out of luck? Thanks, Paulette
 Reply

A  Answered on 5/5/2015 by InyoPools Product Specialist Brian M.

According to the Pentair Catalog, this part requires a call to Pentair tech support ( 800-831-7133 ) with the serial number from the pump.
 Reply


?     Asked on 2/8/2016by Don Larkin

I can not read the display on my variable seed pump for the Pentair intelliflo variable speed the pumps works and runs on my last settings do they sell the display
 Reply

A  Answered on 2/10/2016 by InyoPools Product Specialist Megan C.

Hello, Don. First you will want to verify how the problem. If the display is the reason for the problem you will need to replace the Drive Asy Intelliflo Vs 3050 Kit Almd (350921) click here to view. If you are under any type of Warranty you should contact Pentair at 1-800-831-7133 or click here.
 Reply


?     Asked on 3/9/2017by Paul

Can I just buy the motherboard and not the whole unit?
 Reply

A  Answered on 3/9/2017 by InyoPools Product Specialist Megan C.

Unfortunately, no there is not an alternate option.
 Reply


?     Asked on 4/30/2017by alan McCullough

My LED screen is blank, the pump runs fine but I don't want to spend $700.00 on a new unit. can the communication port be used to make setting ? and what is needed to do this ?
 Reply

A  Answered on 4/30/2017 by InyoPools Product Specialist Scott W.

I recommend giving Pentair a call to confirm that will work otherwise you would need to replace the complete drive assembly.
 Reply


?     Asked on 11/16/2019by Brian

I have a Intelliflo vs3050 pump that is controlled by a Suntouch control unit. The pump drive unit has gone bad. It has Intelliflo 4 160 on the top and is only controlled through the Suntouch controller. Is this replacement unit #353251 compatible with the Suntouch controller. The pump has a date of Feb 2008. Thank you.

 Reply

A  Answered on 11/18/2019 by InyoPools Product Specialist Lennox H.

Hi, Brian. This specific Drive Assembly has been Discontinued and replaced with the IntelliFlo VS/i1/2VST Drive Kit w/ Keypad - 356879Z which is compatible with the SunTouch Controller. 
 Reply


?     Asked on 3/18/2020by Mike T

Will this work on a IntelliFlo VS 3050? On my control pad, the lights work, but does not turn the pump on. This is not covered under my home warranty, so it will be out of pocket for me. I have the older looking control unit, I think the part number is 350109. It has 4 speed buttons, up/down arrow and a start/stop buttons.

 Reply

A  Answered on 3/19/2020 by InyoPools Product Specialist Lennox H.

Hi, Mike T. Yes, this Drive Assembly will replace your existing drive. 
 Reply


?     Asked on 3/18/2020by Gordon Goletto

Sounds like this may have been asked already but I have a pentair pump with an Intelliflo 4-160 controller. This controller has gone out and I'm looking to replace it. What Intelliflo model number am I looking for ...the 356879z
 Reply

A  Answered on 3/19/2020 by InyoPools Product Specialist Lennox H.

Hi, Gordon. That is correct, P/N 356879Z is the correct replacement Drive Kit.
 Reply


?     Asked on 4/6/2020by Inyo Visitor

Good day, we opertate VS 3050 installed in 2013 and would like to know which hard drive kit would correspond to this modell? thanks
 Reply

A  Answered on 4/7/2020 by Industry Professional

should be Pentair mfg # 356879Z ( 35-110-2036 )
 Reply


?     Asked on 8/26/2020by Inyo Visitor

I'm running a vs 3050 the drive controller no longer function. Was wondering if this controller works on my existing driver?? Or will have to get the a new driver/controller combo
 Reply

A  Answered on 8/27/2020 by InyoPools Product Specialist Lennox H.

Hi. You will need to replace the entire Drive Assembly - 356879Z.
 Reply


?     Asked on 5/14/2021by Barry

I have a Pentair Water Model 011017, D/N 176L8089, P/N 351700 and I can't read the control panel once the pump starts up. What is the replacement part number for this? Also, where can I get an instruction manual for this control panel? Thanks.

 Reply

A  Answered on 5/15/2021 by InyoPools Product Specialist Patrick P.

Hi, Based on the information you supplied you will need this Pentair Intelliflo Drive Assembly unfortuanately we do not have the installation manual for this item but I beleive one is included with the item.
 Reply


?     Asked on 8/24/2022by Arnoldo

Will this replace a pentair drive unit #353252 ? If not what is the replacement part # Thanks,
 Reply

A  Answered on 12/5/2022 by InyoPools Product Specialist Hector F.

Hello Arnoldo, The replacement for the Pentair Drive unit part number 353252 is also our part number 353252. This unit is currently on back order however you can add yourself to the "notify me when in stock" list from the items page as well.   
 Reply