Are you able to ship parts overnight
Reply
Yes, but it will depend on the day of the week that you place the order and if the item itself is available for an expedited shipping method. You will know once you are placing the order and have the shipping methods options on your screen. Please view the shipping policy here.
Reply
I just replaced the Speak Pump Strainer and started the pump and it's leaking where the replacement part 2901110100B to the motor housing
I tightened the screws and made sure the o-ring was in place.
Can I put a sealant on the outside as it is spraying a fine mist.
I would take the part apart an look at but removing the screws is easy but tightening them up is difficult
I would appreciate any suggestions.
The leak is small spray now but I want to make sure it doesn't get worse
Reply
Hi, Jim. If you didn't replace and or lubricate the Housing O-ring - 2901141200, I would recommend that you do. That will ensure that it doesn't get worst. Using a sealant is like putting a band-aid on the issue.
Reply
I just replaced the ORing&shaft seal but pump is still leaks where 2901110100B connects to motor housing. One screw thread has worn out on 2901110100B. Is there a way to fix the thread so that i can tighten the screw. Also when i replaced the Oring, i did not lubricate it what lubricant can i use to lubricate it to put it back. Since the screw hole is of plastic, i am scared that i might rip apart couple of more threads when i remove it again.Thanks in advance I would appreciate any suggestions.
Reply
Hi, Pravi. Unfortunately, the threads are unable to be repaired, you will have to replace it. The Magic Lube O-ring Lubricant is what you'll need for all your o-ring for your pool and spa equipment.
Reply
I have a proline PE71 and the order number is 2901110100. My order # does not have a B at the end of it. Will this part still work?
Reply
Yes, this strainer tank will work with your model PE71 pool pump.
Reply
I have a speck 72-IV pump and the pump housing has developed a crack radiating from where the oring is . do you sell a replacement housing ? the housing and strainer are one piece. if you email me back I can supply you with pics
Reply
Hi Mike for the Speck 72-IV pump you will require this 72-IV pump Housing and currently we are estimating 2 weeks for delivery after placing your order. Here is a link to the Speck 72-IV pump Parts Diagram which might be helpful for you to have on hand if you need parts in the future and also to confirm that this is the pump you.
Reply
