Although I needed the front panel, your parts are showing two different of the control boards that go under that. How do I know which one I need to buy?
Reply
Hi Sheila, The majority of the time it is the integrated control board which would need to be replaced. Here is a rather in depth Troubleshooting Manual for the Hayward Universal Heater which shows you how to do various troubleshooting tests on the heater. There is also a fuse on the control board which is shown in the upper right corner of page 10 you may want to try and replace this first before buying the front panel or control board.
Reply
I have a Hayward series h250 heater,am only getting 4 volts to gas valve. Do I need a new control board
Reply
Hi Bob, According the the Hayward H-series LoNox Installation Guide "If 24VAC is not present, gas valve relay on control module is defective. Replace control module"
Reply
Hayward H250FDN heater is giving a CE (Communications Error) display. Trouble shooting manual states Control Module and/or Display Interface Assembly are defective. Both are boards are pricey. Is there a way to determine which needs to be replaced?
Reply
Hi, Joe Eder. You will have to conduct a visual inspection of both boards. Sometimes a singe mark will be left behind. If not then a service technician will have to troubleshoot the unit.
Reply
Our heater unfortunately endured a flood. It currently does not power up at all. What would be a good approach to replacing the electrical components? What should I try first?
Reply
Hi, Michael. Unfortunately, there is no good approach to this other than replacing the unit. We can offer you some assistance if you provide us with the model and serial number of the unit.
Reply
Hello,
The problem I'm having is the heater comes on for 8 seconds then goes out I smell gas and steam than it trys 2 more times and I get a IF code.
Reply
Hi Dave, here is a guide that we put together called "The Most Common Swimming Pool Heater Problems" that may offer some tips to pinpoint the issue.
Reply
Will this fit a sta-rite 200btu heater
Reply
No this board is for a Hayward Heater. I am not exactly sure what part you are after and I am also assuming your have a Sta-Rite Max-E-Therm Heater. Here is the parts breakdown for that pool heater...Sta-Rite Max-E-Therm Electrical Components
Reply
Hello, does this fit the H150FDP as well?
Thanks!
Reply
Hello, yes, the Hayward Integrated Control Board Replacement Kit for Select Hayward H-Series Pool Heater - FDXLICB1930 will fit your H150FDP heater.
Reply
Will this board fit aW3H400FD pool heater?
Reply
Hi Kenneth, yes, the Hayward Integrated Control Board Replacement Kit - FDXLICB1930 will work in your Hayward W3H400FD heater.
Reply