1. Home
  2. Pool Parts
  3. Heater Parts
  4. Jandy LXi Low Nox Gas Heater (2008–Present)
  5. 6204-260
  6. Q & As

?     Asked on 7/10/2014by Guest

Would this work with a jandy lite 2 control panel?
 Reply

A  Answered on 7/10/2014 by InyoPools Product Specialist Patrick P.

No this is not the control panel for the Jandy Lite 2, however here we do carry parts for the Jandy lite 2 heaters
 Reply


?     Asked on 1/26/2016by Jim

Jandy AE2500T, Looking at universal controller R3008800, I do not need control board, just the housing. Is that available ?
 Reply

A  Answered on 1/28/2016 by InyoPools Product Specialist Lennox H.

Hi Jim, The Universal Controller (R3008800) is sold as a complete, you can not purchase just the housing.
 Reply


?     Asked on 6/3/2019by Inyo Visitor

Is this controller compatible with earlier models. I just need unit inside house.
 Reply

A  Answered on 9/27/2019 by InyoPools Product Specialist Michelle B.

Hello, We recommend contacting the manufacturer with that question. You can reach them 1-800-822-7933.
 Reply


?     Asked on 9/17/2019by Agnes

The screen says the pump is off. We try to follow the instructions how to turn it on, still its not working.
 Reply

A  Answered on 9/19/2019 by Industry Professional

It appears from the information you gave that you are following the correct process and one of the buttons on the controller is not working. Ifthis sounds correct you will be looking at a new controller. https://www.jandy.com/-/media/zodiac/global/downloads/h/h0412200.pdf
 Reply


?     Asked on 3/28/2020by Gary Parker

I have a Jandy LRZ pool heater and I have a message on the lcd - Universal Controller UI. See photo attached. I figuring I need a new user interface board. Agree? Thank you

 Reply

A  Answered on 4/2/2020 by Industry Professional

Unfortunately we are not able to confirm the error code that you have thru normal diagnostic channels, you will need to contact the mfg direct for confirmation. Zodiac 800-822-7933
 Reply


A  Answered on 4/2/2020 by Industry Professional

Yes, you will need to replace the controller with this controller it is not completing its boot up process and stops at description and software revision.
 Reply


?     Asked on 5/1/2021by Inyo Visitor

My controller has stopped working. I only need to operate the motor, no heater etc. Is there a cheaper replacement controller that only programs pump speed and start times?
 Reply

A  Answered on 5/1/2021 by InyoPools Product Specialist Patrick P.

Could you send us a few photos of your Control system and Controller? To supply photos simply click the reply link below and upload your photos. Once we get those photos we can make the proper recommendation.
 Reply

  • Commented on 5/1/2021 by Product Owner

    Here is the photo. Thanks

     Reply

    • Commented on 5/1/2021 by InyoPools Product Specialist Patrick P.

      Thanks for the Photo! If you have a Jandy Variable Speed Pump then you will require the Jandy JEP-R Controller and not the controller on this page.
       Reply


?     Asked on 8/29/2021by Inyo Visitor

KEYPAD IS LOCKED. HOW DO I UNLOCK PAD SO THAT I CAN PROGRAM PUMP
 Reply

A  Answered on 12/30/2021 by InyoPools Product Specialist Joe S.

Press and hold both arrow keys for five (5) seconds to lock the keypad. To disable the keypad lock, repeat the procedure while the keypad is locked.
 Reply