I have a Paramount canister but the right angle plastic pieces on the edge of the canister that the lid locks into have fallen off. Do you carry them? I need two.
Reply
Hello, Tim. Yes, we do offer the part it is a DEBRIS CANISTER STOPS PARAMOUNT. The part number is 005-670-6192-02. It is a retrofit part designed by Paramount for the old and new style Debris Canisters.
Reply
Do you offer the gasket that goes with the canister?
Reply
Hi, Eddie. The Canister Lid O-ring - 005-152-0120-00 is available.
Reply
I have an older pool with the Paramount Debris Canister that is built - into the deck next to pool. The lid has broken in places - it has old part number 1-9-3518 on it. It looks slightly different than this version - 005-152-4580-00. Will this new version work to replace my old one?
Reply
Hi, Brian. Yes, this Clear Lid will replace the older clear lid Paramount Lid.
Reply
I have an old paramount cover part number 1-9-3518. It goes to a in floor cleaning system. I also have a bag that sets under it that needs to be replaced.
Reply
Hi Tim, Yes this is the correct replacement for your Paramount cover part number 1-9-3518. The Paramount bag you referenced has been discontinued but can be replaced with this Paramount Filter Basket.
Reply
This lid is on a leaf trap for my in ground pool. There are stops that are on the walls of the canister. Where can i get these? I understand they come in packages of 4
There was an old style that was a package of 4, it is replaced with a new style ring mfg # 005-670-6192-02 ( 87-214-1102 )
Reply
I have an older pool with a paramount canister and the lid part # is 5-265-631. Will this lid replace the one I have? And if so, can you point me to the gasket as well?
Reply
I do not have a listing to compare the 5-265-631 with the Clear Lid, Paramount Canister (005-152-4580-00), this lid uses the ORING, CANISTER LID (005-152-0120-00) The manufacturer can be reached at https://www.1paramount.com/support/contact/ to review the part number with them before ordering. (InyoPools Return Policy http://www.inyopools.com/return.aspx)
Reply
does this require a rubber seal
Reply
Hello. The Paramount Clear Lid 005-152-4580-00 requires the use of Paramount O-Ring 005-152-0120-00. ORING, CANISTER LID (005-152-0120-00)
Reply