How do I change the shaft seal on my pool pump?
Reply
Changing the shaft seal is quite simple. Here's How To Replace a Pool Motor Shaft Seal.
Reply
I have a PlusHP pump model: PHPF 1.0
serial number K07fb0396
I am replacing the motor part: 7 - 193986 24 with a B854 motor.
Is this the correct Shaft Seal?
Thanks
Reply
Good morning Pat, The seal you are looking for is Shaft Seal (R0479400) OEM.
Reply
Which bearings and shaft seal for serial number 306093 M or part 7 - 193987-24
Reply
Replacing the motor, looking for the correct shaft seal - Jandy Stealth SHPM1.5 S/N R08FK1117. Thx
Reply
What shaft sea for a Jandy Model #PHPM2.0; serial # R09FH0357? Thanks!
Reply
This will be the proper seal you will need,http://www.inyopools.com/Products/07501352058887.htm
Reply
I have a Jandy Stealth 2.5hp Model SHPM2.5 Serial # K07FB2754 is this the correct shaft seal R0479400 or do I need the old style?
What is the proper pump shaft seal for Century Centurion B2583?
Reply
Hi. We will need to know the model of the pump housing in order to identify the pump shaft seal. You can use our How To Find The Correct Pool Pump Shaft Seal For Your Pool guide.
Reply
Thanks to your help, I have the right motor replacement for my pool pump, but I want to make sure I also get the correct shaft seal as well. Is this the correct shaft seal for Jandy FloPro Model #FHPM1.0? Thanks!
Hi does the Jandy Stealth Model SHPF2.0. with Serial number U13FL0472 require new style 5/8" shaft seal?
Reply
I have a Jandy Stealth SHPM 2.5-2 motor. is this the correct part? Serial Number U14FL0172.. it seems that it's supposed to be but i want to be sure.
Reply
I need a replacement for this. Thanks
Hi, Peter. Please provide the make and model of the pump housing that this seal is for so that we can confirm the replacement. You can review our How To Find The Correct Pool Pump Shaft Seal For Your Pool Blog if you do not have the pump housing model.
Reply
As most have asked, looking for the right pump shaft seal Stealth 2.0 model SHPN2.0-2 serial number R09FH1117
Reply
Hi Brian, this is the correct shaft seal for the Jandy Stealth SHPM series pool pump with a serial number beginning with a letter after the letter "P".
Reply
I have a Jandy PHPM2.0 pump with an AO Smith motor that no longer works. I was able to source a replacement Century B2859 motor / 56Y chassis / square flange for this, I need to know which shaft seal I should use when re-installing.
Thanks in advance!
Reply
Hi Rich, Could you please supply use the serial # from the pump this should be on the label which says the model # of PHPM2. This information is needed to let you know the proper shaft seal.
Reply
I need to know what pump shaft seal I require for a Century model B2859 pool pump. Picture of pump label attached. Is that all that's required for removing and replacing the existing defective pump? Thank you.
For us to suggest the proper seal kit could you send a photo of a wide shot of your complete pool pump to show the pipes going in and out of the pump? To supply this photo simply click the reply link below and upload your photo. Once we get this photo we can make the proper recommendation for the seal kit.
Reply
I have Jandy PHPM1.5 pump with searial # R10F11362, will this shaft seal fit to my pump? Motor is Century AO Smith 0-193986-24, what is the correct replacement motor? Thanks.
which shaft seal do i need for Jandy Stealth SHPF3.0 serial RO8FK1324?
Reply
Hi Karl, this is the correct shaft seal for the Jandy Stealth SHPF series pool pump with your serial number.
Reply
I am changing the bearings in my electric pool motor I need new bearings and a mechanical seal. could you please tell me which ones you have that will work on my motor?
Hi Susie, the shaft seal for your Jandy Stealth SHPF series pool pump with your serial number is part number 5020-086, and uses two of the 6203 bearings.
Reply
Can you tell me what bearings and seals I will need for this motor?
Hi Glen, the bearings for this motor part number is 193995 is 5270-31 and there are two potential shaft seals for your Jandy SHPF series pool pump but is based on the serial number. You can view both seals and the serial numbers that work with them on key number 5 on this parts diagram.
Reply
Have Jandy Stealth model SHPF3.0, SERIAL P08FG0264, LOOKING FOR THE RIGHT SHAFT SEAL. MOTOR WAS 3 HP PART #B844
Reply
need to know the seals or gaskets needed for zodiac model#SHPF 1.5-2 serial number U1 (?)2FA0064 the letter after the U could be a l or i or 1
Hello Diana. If this repair involves replacing the motor, the motor shaft seal, seal plate gasket, and diffuser O-ring should be replaced at the same time. Attached please find information specific to these parts. Jandy Pump Shaft Seal 5/8" - R0479400 Backplate O-Ring, Generic - R0446300 9-1/2" ID, 3/16" Cross Section O-521 Diffuser O-ring - R0622000
Reply
I need the seal for my Jandy Stealth pump. There appear to be two options but my serial number doesn't seem to match either the old style or new style. I'm looking for the ring seal (part no. 5 on the exploded view) M
My model no is SHPM1.0
Serial No. R10FL0702
Appreciate any help
Gene
Reply
Hello Gene. The correct shaft seal for your Jandy Stealth SHPM model R10FL0702 is R0479400. The "10" in your serial number references the manufacture year 2010. The new style shaft seal was utilized on the Jandy Stealth SHPM model beginning the manufacture year 2008.
Reply
Correct pump seals and shaft o-ring for a Jandy PB4-60 serial number PB080916336? Motor shaft is 5/8 of an inch.
Reply
Hello Alan. Attached please find a brief tutorial on the topic of Polaris (Jandy) Booster Pump Model identification. How To Determine the Date Range of a Polaris PB4-60 Booster Pump Identifying the model year will cross-reference to the correct shaft seal.
Reply
Hello,
I need a seal for a Jandy Pro Series Stealth, Serial# U12 E(or F)K 0462. Can you please advise what part number I need?
Thanks,
Darren
Reply
Hello Darren. Attached please find the Jandy Stealth SHPF & SHPM Series Pump (2008-Current) exploded parts diagram for reference. The Jandy Pump Shaft Seal 5/8" - R0479400 is compatible with the Jandy Serial Number beginning with the letter U.
Reply
I just purchased a replacement motor, wondering if this is the correct shaft seal for that motor century 1.5hp square flange 56Y. Purchased on your site
Reply
Hello John, so shaft seals are actually dependant on the model of the front pump housing the motor is bolted to. Here is our "How To Find The Correct Pool Pump Shaft Seal" guide that should assist with that.
Reply
Hello - is this the correct Shaft Seal for Jandy PlusHP Model PHPM1.5-2 Serial: U14FC1590. thanks
Hello Elia. The Jandy Pool Pump Mechanical Shaft Seal - R0479400 is the correct shaft seal for the Jandy PlusHP PHPM 1.5-2 with Serial Number U14FC1590. Attached please find the Jandy PlusHP PHPM Series Pump (2006-Current) exploded parts diagram for reference.
Reply
