?     Asked on 5/27/2016by Willy

I am intrested in the power supply switch only for the classic Aquabot. It was a very weak to begin with and it came apart over this weekends use. Thanks Willy
 Reply

A  Answered on 5/30/2016 by InyoPools Product Specialist Alex V.

Willy, Unfortunately, we don't carry parts for the power supply. You will need to contact Aqua Products to see where you can source one.
 Reply


?     Asked on 6/21/2016by Inyo Visitor

I bought two fuses for the Aquabot junior from you recently and both popped immediately on implementation. order # 61CA394-1, po 635491. Can you check there was little information included with the items so I believe they were not the right item. What can we do about this. I work in Windsor and could come by tomorrow if that's an option
 Reply

A  Answered on 6/26/2016 by InyoPools Product Specialist Lennox H.

Hi, The Fuse you order is not specifically for the Aquabot Power Supply 7060D, the Generic Mini 2.5 Amp Slo-Blo Fuse is the correct fuse for this power supply.
 Reply


?     Asked on 6/29/2016by John Hoffman

quabot classic power supply fuse T3 15A 125V The fuse is blown and I want to buy a replacement. Where can I get this fuse?
 Reply

A  Answered on 7/4/2016 by InyoPools Product Specialist Lennox H.

Hi John, The OEM Mini 2.5A, 250v, Slow-Blow Fuse (7207), or Generic Mini 2.5 Amp Slo-Blo Fuse (001-1020) can be used with this Power Supply (7060D).
 Reply


?     Asked on 7/29/2016by Inyo Visitor

I purchased a classic in-ground robot cleaner but it came with no power supply where do I get one with a timer that's not over 500.00.
 Reply

A  Answered on 7/31/2016 by InyoPools Product Specialist Lennox H.

Hi, There is not a power supply with timer that is compatible with the Aquabot Classic cleaner.
 Reply


?     Asked on 6/10/2017by Tom

will this replace Auqaproducts T2-36 3 male prong power supply
 Reply

A  Answered on 6/22/2017 by InyoPools Product Specialist Lennox H.

Hi, Tom. The correct power supply for the Aquabot T2 unit is p/n 7184C.
 Reply


?     Asked on 5/19/2018by Inyo Visitor

my aquabot keeps blowing fuses even with the robot not connected. if i need a replacement ,mine has the female end to accept the floating male end.
 Reply

A  Answered on 5/20/2018 by InyoPools Product Specialist Lennox H.

Hi. We can locate the correct replacement if you provide us with the cleaner model or the power supply number. 
 Reply


?     Asked on 7/20/2018by Miles Reader

I have an Aquabot XTreme. it is currently on it's last leg according to my pool supply co. That being said. My understanding is that the original power supply has a timer. I noted this replacement does not. Can you please explain why not. I really appreciated the ability to start it up and walk away with out having to worry about whether I turned it off,
 Reply

A  Answered on 7/22/2018 by InyoPools Product Specialist Lennox H.

Hi, Miles. The manufacturer didn't place a timer in this model, I'm not sure why. You can use Part # 7184C as an alternate replacement.
 Reply


?     Asked on 5/22/2019by Brett Rushing

I have an Aquabot Junior Industrial Z and I am having a hard time finding the right power supply. Judging by the picture this is the closest I can find. My floating cord is a male 3-prong all the same size. I noticed some have a three prong with one of the holes being a smaller round shape. Any help would be appreciated. Picture is attached.

 Reply

A  Answered on 5/22/2019 by InyoPools Product Specialist Patrick P.

Hi Brett, This is the new replacement Aquabot Junior Power Supply and it will work with older AquaBot Junior Power Supplies.
 Reply


?     Asked on 5/26/2019by Joseph Dierker

I had a fuse blow for the first time on my power supply with a timer. It came with our Aquabot Extreme several years ago. I ordered a replacement fuse, fuse bed and fuse cap. I have been unable to figure out how to open the power supply in order to replace the fuse bed. Are you able to advise? Please see attached photos. Thanks.

 Reply

A  Answered on 10/15/2019 by InyoPools Product Specialist Steve M.

Joseph, we apologize for the inconvenience, however, we have been unable to obtain that information from the manufacturer in order to answer your question.
 Reply


?     Asked on 6/12/2019by Alan

I need to see what the electrical connection, jn the bottom right front of the blue box, looks like It has to match the three prong, inverted "V" type on my electrical plug on the long cord from the robot. Can you send me a good picture of that area.
 Reply

A  Answered on 10/15/2019 by InyoPools Product Specialist Steve M.

Alan, I apologize for the inconvenience, however, we were unable to obtain a photo of the electrical connection area from the manufacturer.
 Reply


?     Asked on 6/15/2019by Bill Grierson

I have a aquabot turbo classic with 3 prong plug and timer, Will this box work?
 Reply

A  Answered on 7/26/2019 by InyoPools Product Specialist Michelle B.

Hello, Yes, this will be the correct box you will need.
 Reply


?     Asked on 6/16/2019by Inyo Visitor

i need a power supply fuse cap to hols the fuse, plus a T3.15A250V fuse.do you carry this part?
 Reply

A  Answered on 10/15/2019 by InyoPools Product Specialist Michelle B.

Unfortunately, we would not carry that fuse on our website.
 Reply


?     Asked on 6/26/2019by James

Hi, i own an aquabot industrial z1 and the Power box is dead. It's a 2 prong will this work on that?
 Reply

A  Answered on 9/19/2019 by InyoPools Product Specialist Hector F.

Unfortunately, we do not carry parts for your model cleaner. You can always confirm the part number for your power supply directly with the manufacturer Aquaproducts at (800) 845-4856.
 Reply


?     Asked on 7/20/2019by Inyo Visitor

Is this product, 7060D AquaBot classic power supply, new or refurbished?
 Reply

A  Answered on 7/23/2019 by InyoPools Product Specialist Jessica C.

Hi, The POWER SUPPLY, 120/36VAC, 2 PRF SOCKET, NO TIMER; (Single) - 7060D, is a new item.
 Reply


?     Asked on 10/23/2019by Ken R

Hello, I have a Auqabot Classic Power supply 7060D. The lighted red rocker switch is broken. This is a 16A 125V AC switch made by SOKEN part # RK1-14, 3 prong. Do you have this part to sell me? if not, can you recommend something? Thanks, Ken

 Reply

A  Answered on 10/24/2019 by InyoPools Product Specialist Michelle B.

Hello, Unfortunately, we would not know. We recommend contacting the manufacturer with that question. You can reach them at 1-800-845-4856.
 Reply