I need a power supply for my aquabot turbo. serial number is gone but a number on the pump is 60-t a6001. It is quite old the motor is not original will 36volt supply run it ok?
Reply
Hi Bruce, Yes this would be the correct power supply for your Aquabot Turbo and 36V would be okay.
Reply
All of a sudden the transformer will not turn on. I've tried a know good outlet and replaced the fuse but still no power. Any ideas?
Reply
Hello Mark, you might want to run diagnostic with Aqua Products 1-800-221-1750 so just in case there is anything needing to be reset.
Reply
My T2 transformer doesn't work. I want to make sure I'm purchasing the correct replacement. The barcoded label on the transformer is: 7098D0447201.
Can you tell me the correct replacement part number?
Reply
Hello Mark, is this for a T2 Aquabot Turbo, just to verify please call Aqua Products 800-221-1750 to make sure your transformer lines up to your 7098D0447201.
Reply
is the power supply output AC or DC?
Reply
Good afternoon dfarris4@austin.rr.com, It is AC. If you have any further questions feel free to ask and have a wonderful Holiday.
Reply
auqabot supreme will not move when inserted in pool
Reply
Hi, D. To diagnose the issue, you will have to test the Power Supply and or the Cable. For other troubleshooting tips reference the Aquabot Supreme Operation and Troubleshooting Manual.
Reply
I have a Aquabot T2 (Remote) and it has stopped working while in the pool. Everything appears normal at the power supply box (Model# 7088C-002) as far as the fuse, on/off switch and digital readout of 1-7 hours to run pool cleaner. I have checked the power source reading going to the power supply and getting 125 ACV on my voltmeter. When I checked the ACV that's exiting the power supply source, I'm reading 40 ACV. Is my failure in the T2 Aquabot with the capacitor? Thanks
Reply
Hi Dwayne, It sounds like you may have a bad motor in the head of the AquaBot Cleaner. I would suggest watching our Video on How to Troubleshoot Robotic Pool Cleaners the cleaner in the video is a Dolphin Robotic cleaner but the principles will be the same for your AquaBot.
Reply
Hi. Is this a two prong transformer. Also, would you think this is the issue for the aquabot not running the complete 7 hours? or is it something within the bot itself. I did order and change the drive belts like I have done in the past so i'm not sure if it's the actual transformer, fuse, or aquabot internally. I am in the plumbing trade but the physics of this have me a bit confused...Please help and thank you!
Reply
Once you set the Timer on the Power Supply it should stop after the time you set it for, it’s possible you have problems with the Timer.
Reply
I have an old aquabot turbo classic. I'd say around 2002. The power supply is a 3 prong male receiver. Will this power supply work? There isn't a part number to look for.
Hi, Yes this 7184C AquaBot Classic Power Supply would be the proper replacement power supply for your AquaBot Classic shown in your photo. We do currently have this power supply in stock ready to ship!
Reply