Will this work with the Aqua bot junior mines about 2 years old !
Reply
Will this work on blue pearl water tech?
Reply
Hi, Lien. This Power Supply is not compatible with a Water Tech Blue Pearl Cleaner, see the Water Tech Blue Diamond & Blue Pearl Parts Diagram for available power supply.
Reply
Is this compatible with aqua boy xtreme? Thank you.
Reply
Hi, Karen. This Power Supply is not compatible with the Aquabot Xtreme unit, the Power Supply - 7060D unit is.
Reply
will this work for aquabot bravo 3
Reply
Unfortunately, we do not have a schematic to the cleaner. You may verify the by checking the model information on your old power supply to confirm the model numbers are the same or contact Aqua Product directly with the serial number to the cleaner.
Reply
HI Will this work with Aquabot Bravo?
Reply
Hello, This will be the power center you will need. http://www.inyopools.com/Products/07800005084473.htm
Reply
need to know if this will work for the Aquabot Classic 2 prong
Reply
Hi, Milton. This Power Supply is not listed as being compatible with the Aquabot Classic Turbo. You will need Part # 7184C
Reply
Not a turbo just a classic aquabot
Hi Milton, sorry about that. We show that the Aquabot Classic requires the 7060D Power Supply
Reply
Is this the power supply for the Pool Rover Jr? Thanks
Reply
Hi Greg, yes this power supply does work with the Pool Rover Jr.
Reply
You say this will work with a pool rover jr? my power supply has a 3 prong socket and the photos on this one shows to only be 2
Reply
Hi Lisa Aquaboat makes a 2 prong to 3 prong adapter that you would use. Please see the attached photo.
Will this work with the Z1 Industrial model?
Reply
Chris, no the Aqua Products Power Supply, 120/48VDC, Single Shaft Motor, 2 PRF Socket, Internal Timer, 2PRGM will not work with the Z1 industrial model.
Reply
I have a aqubot pool rover junior. The original power supply has a 3 prong and this one is 2 prong. Do i need a 2 prong to 3 prong converter cord or will the 2 prong still work?
Reply
Does this power supply work for the aqua bot turbo? It’s an older model with 3 pins and 36 volts.
My old power supply broke.
Reply
will this power supply work on a aquabot classic #7060
Reply
Douglas, no you would need the POWER SUPPLY, 120/36VAC, 2 PRF SOCKET, NO TIMER; (Single) - 7060D.
Reply
WIll this work with Aquabot Turbo Classic - the current model of the power supply is aquacontrol 2723000. It is 4 pronged inlet to connect to cleaner
Reply
HOW DO I TROUBLE SHOOT POWER CONTROL NOT OPERATING.
LIGHTS GO ON BUT NO SOUND OF MOTOR RUNNING?
Reply
Please click here to view our "How to Troubleshoot a Dolphin Pool Cleaner" guide.
Reply
Mine was doing the same thing. If I wiggled the plug, my robot would start up. I discovered that the plug from the robot that goes into the power supply as well as the outlet on the power supply have become corroded. See if you can clean them with sandpaper and/or a file. (MAKE SURE POWER SUPPLY IS UNPLUGGED!)
Reply
Will this work with the Aquabot Extreme pool cleaner?
Reply
