plugged In which to use and when I hit the on button the small and large select button start flashing what is that the reason for that
Reply
Hi, Pamela. This specific Power Supply has an external run setting. So after you select the Pool size, you will need to press the EXTERNAL RUN button.
Reply
Where is the external run button located please
Where is that button because mine is doing the same thing
Reply
I just bought the power supply box can you tell me what is the circle on the left with the arrow and what purpose does it do
Reply
Hello, The button on the bottom left is the timer button, the two arrows is the different types of cycles, the big one on top is the power.
Reply
I have model # A780021AG SDP12023030 the power supply does not seem to be working. NO Lights. The power outlet is fine that supplies the unit. Does it have a fuse, or how do I get to it.
Reply
Yes, the SK, Power Supply, Switching, Ext Timer, US Plug - SKPOWER06 does have a fuse. Unfortunately, that part is not available for sale. You would need to purchase a new unit.
Reply
My aqua power pack, the two blue lites keep on blinking. Is there a fix for this thanks
Reply
Glenn, we apologize for the inconvenience, however, we are not qualified to troubleshoot this device. We suggest contacting the manufacturer directly for better assistance. They can be reached by calling 800.845.4856.
Reply
I have a Jet Drive iG when I turn it on both lights flash and machine barely moves.
Reply
Ed, we apologize for the inconvenience, but we do not troubleshoot the Jet Drive IG pool cleaner. For the best assistance with this matter we suggest calling the manufacturer directly. Aquabot can be reached by calling 800.845.4856.
Reply
I have a Doheny Jet Drive IG by Aquabot Model #A&8002 SP12023048
It starts and then stops. Both lights begin to flash....
Reply
Hello,We recommend contacting the manufacturer with that question. You can reach them at 1-800-845-4856.
Reply
When I turn on the pool rover starts, then stops after 20 sec. Always going the same way. Then approximately 2 minutes later both the large and small LED's blink together. I try to reset, by pressing the power button but this continues to happen. Please help
Reply
Paul, it sounds like the power supply is not relaying the signals correctly to the cleaner. I suggest replacing the power supply if the cleaner is over 4 years old.
Reply
is this compable with rover 2 series
Reply
Hello, That will be the incorrect power center. Can you please confirm the model number of your vacuum so we can find the correct vacuum? Or if you can send a picture of the vacuum we can further assist you.
Reply
1 have an aquabot pool rover model # S2-40. It is 2 years old. When I plug it in there and push the power button there is no power. Is there a fuse somewhere that I am not seeing.
Reply
Hello, Unfortunately, we are not certified Maytronic reps to properly troubleshoot this for you. We recommend contacting the manufacturer with that question. You can reach them at 888-365-7446.
Reply
The small and large pool are blinking at the same time
Reply
Hi. This can be caused by the following issues; • Check to see if the unit is out of water. • Check to see if the filter bag is stuck in the motor protection screen. • Check to see if the propeller is stuck. • To restart, press the power button once. Cleaning program will resume from where it left off.
Reply
I have an Aqua Products Power base. Model number A780021AG and there is a number below that SDP12023030 . Do you sell a replacement for this one?
Reply
Hi, Nancy. I was not able to locate a replacement using the info provided. Please provide the unit model # or name.
Reply
What does it mean when there is a flashing red light on the power supply box for your pool cleaner
Reply
Hello, LED LIGHTS ARE BLINKING ON THE POWER SUPPLY • Check to see if the unit is out of water. • Check to see if the filter bag is stuck in the motor protection screen. • Check to see if the propeller is stuck. • To restart, press the power button once. Cleaning program will resume from where it left off. For any additional questions or concerns please call Aqua Products.
Reply
