i have bought 2 pools and MANY parts.VERY upset.ordered 2 skimmer hoses for spares.needed to appy one a few days ago.it is one and half inches in diameter.pool requires one and quarter.just now was going to order again.NO DESCRIPTION FOR DIAMETER.need later size mentioned.how many have you sold item number is 10531 always been this number.please help.
Reply
Hello Betsy, The intex 10531 can be replaced by 4570 Intex Surface Skimmer Hose. This hose is 1.5" in diameter.
Reply
does this 1.5 inch hose slide over the fitting on the bottom of the surface skimmer?
Reply
Hi, The hose will slide over the adapter on the end of the skimmer, you will also need S.S. Hose Clamp to secure it to the skimmer.
Reply
do you have hose with 1 9/16 internal diameter of the ends??
Reply
Hi Carin, We carry several type of hoses, if you can let us know what you're using it for we can locate a hose that you can use.
Reply
my pump is attached to the bottom of the skimmer and hose is 36" long will this hose work
Reply
Hi, This hose is only 26-1/2" long it will not be long enough. You can use the 1-1/4" 3' Filter Hose or 1-1/2" 3' Filter Hose.
Reply
Our skimmer hose has some tears in it, what effect does this have on our pump operation? This is the short hose that attaches from the skimmer basket to the pool wall. It is completely submerged underwater.
Reply
A damaged hose will allow the water to pull from the tears. This will in turn reduce the effectiveness of the skimmer, and potentially any vacuum you connect through the skimmer. Outside of that, there will be little to no effect on the rest of your equipment.
Reply