1. Home
  2. 46003000
  3. Q & As

?     Asked on 10/14/2013by Guest

The cleaner will not move. What should I do?
 Reply

A  Answered on 10/14/2013 by InyoPools Product Specialist Megan C.

Hello,Thank you for the reply back. The best area to start with robotic cleaners that are not moving is the impeller, it can collect debris and stop the cleaner from moving and will need to be cleaned. The filter bag or filters should be cleaned or replaced if not moving.
 Reply

  • Commented on 6/2/2020 by Product Owner

    I have this model robot and it uses all the same parts as the Hayward Tiger Shark mentioned above. I would like to let Patrick R. know that this robot does not use water hoses and does not connect to the filter in any way. The only “hose” type part is the power cord that floats on the water. The unit runs independently of the pool filter.
     Reply


?     Asked on 6/16/2017by Inyo Visitor

I have a dirt devil rampage pool vacuum; it appears to be made by Hayward only because it so similar to tiger shark model. I used a Hayward tiger shark handle to replace my broken one. Now I'm trying to replace belts, brushes and belt guides. Are there specific dirt devil parts or would Hayward parts fit?
 Reply

A  Answered on 6/17/2017 by InyoPools Product Specialist Patrick P.

For the Rampage Robotic Cleaner you can use the same parts as the Hayward Tiger Shark Parts. Here you may view or purchase the Tiger Shark Robotic Cleaner Parts.
 Reply


?     Asked on 4/7/2019by patty

I have this Dirt Devil pool vacuum & my handle split. Can I get a new replacement handle? What is the cost?
 Reply

A  Answered on 4/10/2019 by InyoPools Product Specialist Michelle B.

Hello, Unfortunately, we do not carry the replacement parts for this cleaner. We recommend contacting the manufacturer to see where you can get the replacement parts.
 Reply


?     Asked on 4/17/2019by BILL

Are the filters still available for this vacuum 46003000?
 Reply

A  Answered on 4/17/2019 by InyoPools Product Specialist Lennox H.

Hi, Bill. Yes, Filter Cartridges - RCX70101 and the Spring Filters - RCX70103PAK2 are still available. 
 Reply


?     Asked on 5/8/2019by Jared

Can i buy the handle? It broke and it wont work correctly without it.
 Reply

A  Answered on 5/8/2019 by InyoPools Product Specialist Hector F.

We unfortunately do not carry parts for this cleaner. You can always contact the manufacturer GLI at 1-800-448-2343 to confirm the part number for that handle and a retailer that may carry those parts.
 Reply


?     Asked on 4/14/2020by Inyo Visitor

Hi. It was working when I used three months ago. This time it hardly moves around. Checked filters and nothing in there. Is there anything else I should check?
 Reply

A  Answered on 4/15/2020 by InyoPools Product Specialist Lennox H.

Hi, You will need to inspect the Drive Tracks and Pully Gears for any wear. 
 Reply