?     Asked on 7/8/2017by John

Yes, do you have any candelabra bulbs for a pentair pool light?
 Reply

A  Answered on 7/10/2017 by InyoPools Product Specialist Joe S.

At this time there are no LED's that will fit in a Candelabra based unit. 
 Reply


?     Asked on 9/3/2017by Tim Barrett`

can you install a 120v colorsplash lxg series bulb into a 12v system? or do I need to purchase a 12v bulb Thanks, Tim
 Reply

A  Answered on 9/5/2017 by InyoPools Product Specialist Lennox H.

Hi, Tim. You can not install a 120v bulb into a 12v fixture.You'll need the ColorSplash LXG LED Pool Lamp 12V - LPL-P2-RGB-12 which is the 12V option. 
 Reply


?     Asked on 3/10/2018by Allen A

Can these bulbs be used with a dimmer switch? I will have 3 on the same circuit controlled by a dimmer switch.
 Reply

A  Answered on 3/12/2018 by InyoPools Product Specialist Lennox H.

Hi, Allen A. The Color Splash LXG lamps cannot be used with dimming systems. You will have to remove the dimming switch. 
 Reply


?     Asked on 4/27/2018by Elena

I have a Sta-Rite metal ring that measures 8.5" outside edge to outside edge. The gasket has ten (10) holes in it and measures 7-5/8" in diameter. The lense has ten (10) holes along the perimeter and measures 7-3/8" in diameter. Do you have a gasket for this light system?
 Reply

A  Answered on 4/27/2018 by InyoPools Product Specialist Lennox H.

Hi, Elena. You have the Sta-Rite SwimQuip light fixture, we do carry the SwimQuip Lens Gasket - SQ5057-118 (Standard) and LPL-G-S (Heavy Duty). 
 Reply


?     Asked on 6/30/2018by Ron Stephens

Does this Pool Lamp Fit/Work in a Jacuzzi Full Moon Light Unit? Ordering the Jacuzzi "Fullmoon" Light assemely from you and this light was show below in on the same page. Hope it will work?
 Reply

A  Answered on 7/1/2018 by InyoPools Product Specialist Hector F.

Yes, this model LED bulb is compatible with the Jacuzzi Full Moon pool light. 
 Reply


?     Asked on 11/18/2018by Tom

What is the lumen output for the 35 watt unit?
 Reply

A  Answered on 11/28/2018 by InyoPools Product Specialist Steve M.

The lumen output on this bulb is 850 lumen.
 Reply


?     Asked on 6/22/2019by Bonnie Downey

I purchased pl5811 and feel it isn’t strong/bright enough. Will this LXG LED be better? I noticed the pl5811 has only 12 watts and this one has 23. I don’t want to purchase another bulb one day after the last one but I would like more light in the pool.
 Reply

A  Answered on 6/23/2019 by InyoPools Product Specialist Steve M.

Hi, Bonnie. This LXG bulb is brighter than the PL5811. Cleaning or replacing the fixture lens will allow the bulb to be maximized.
 Reply

  • Commented on 6/23/2019 by Product Owner

    Thanks for info. I will look for new lens.
     Reply


?     Asked on 3/8/2020by Ralph

I Have 2 Jandy WPHV500WS100 and 1 WSHV100WS100 light fixtures. Will the ColorSplash LXG LEDpool lamps 120V fit in my light housings? Do the lights come with the replacement gasket? If not, which gaskets fit my housings?
 Reply

A  Answered on 3/9/2020 by InyoPools Product Specialist Lennox H.

Hi, Ralph. Yes, the ColorSplash LXG LED Lamps are compatible with your Jandy White Incandescent Pool and Spa Fixtures. 
 Reply

  • Commented on 3/9/2020 by Product Owner

    Do they come with the gaskets?
     Reply

    • Commented on 3/9/2020 by InyoPools Product Specialist Lennox H.

      Hi, Ralph. Gaskets are not included, (2) Silicone Lens Gasket - R0451100 and (1) Silicone Gasket - R0400501 will have to be purchased. 
       Reply


?     Asked on 6/1/2020by Jim

How do the colors change? Can you pick/stay on one color?
 Reply

A  Answered on 6/1/2020 by InyoPools Product Specialist Hector F.

You can use the model LPL-XG-CTRL-1 controller that you can view by clicking here or you can use the regular switch to turn the circuit off and on to cycle through the colors or color light shows. 
 Reply


?     Asked on 7/2/2020by Inyo Visitor

I have a Jacuzzi fixture model # MCFMH 30 Fixture, will this 120-LPL-P2-RGB-120 bulb fit this fixture?
 Reply

A  Answered on 11/20/2020 by InyoPools Product Specialist Hector F.

Hello, these J & J Colorsplash lights are compatible with certain niches so you will need to locate your niche model. Please see this Colorsplash datasheet for compatible niche models.
 Reply


?     Asked on 2/1/2021by JC Ortiz

Which Color changing LED bulbs are compatible with my pentair 78458100 fixture?
 Reply

A  Answered on 2/3/2021 by InyoPools Product Specialist Hector F.

Hi JC, any of these 120 Volt LED pool light bulbs are compatible with your Pentair Amerlite pool light model 78458100. I would suggest replacing the lens gasket as well. 
 Reply


?     Asked on 5/1/2021by Peter Feller

I have an EasyTouch Controller and am wondering if I can change the colors using the controller. I understand that I can switch the light on and off, but I want to understand how the colors are controlled.
 Reply

A  Answered on 5/2/2021 by InyoPools Product Specialist Patrick P.

Hi Peter, We put together this Video on How to Control a Pool LED Light Bulb which shows how the colors are controlled. The video is a different bulb but it works the same way as this bulb. Using an EasyTouch Controller would work the same as a light switch by powering the light on and off relatively quickly to cycle through the color shows.
 Reply

  • Commented on 5/2/2021 by Product Owner

    Does this mean the only way to control the color is via switching on and off a certain number of times? I thought the easytouch has menu options to control color lights. Also, this will not integrate with Screenlogic, right? Is there any system that allows this functionality to be controlled via screenlogic?
     Reply

    • Commented on 5/3/2021 by InyoPools Product Specialist Patrick P.

      Hi Peter, Yes for this light the only way to control is by switching the light on and off relatively quickly through your EasyTouch/ScreenLogic controller. The good thing is the bulb has memory so let's say if you find out that you like the Party Mode color show and if that is the last color show the light was on when turned "Off" then the next time the light is schedule to turn "On" then it comes on in the last mode used, in this scenario the next time the light turned on then it would turn on in "Party Mode". If you want for the color shows to display on your EasyTouch/Screenlogic controller then you would need to go with one of these Pentair Intellibrite Lights.
       Reply


?     Asked on 5/6/2021by FM

I currently have a 500 watt 120v halco bulb and looking to replace with the LED 23 watt.. Is the LED as bright
 Reply

A  Answered on 5/7/2021 by InyoPools Product Specialist Craig C.

Hello.  The ColorSplash LPL-P2-RGB-120 is rated at 1440 Initial Lumens.  A  500 Watt incandescent bulb delivers a brightness of 5000 lumens.
 Reply