?     Asked on 5/28/2016by Rachel

We are trying to find the correct pool caps for a doughboy 24 above ground pool and are not sure we are measuring properly. Please advise.
 Reply

A  Answered on 5/28/2016 by InyoPools Product Specialist Alan M.

Hello Rachel, unfortunately, we do not carry any parts that are compatible with the Doughboy pool models.
 Reply


?     Asked on 8/26/2016by Rick

Do you have the support for top cap 10146? I need this also.
 Reply

A  Answered on 8/30/2016 by InyoPools Product Specialist Lennox H.

Hi Rick, The p/n 10159 is the support for this top cap.
 Reply


?     Asked on 4/10/2017by Don

I need the top ledge that goes with this cap. It is 6 1/2 inches wide and 51 7/8" long on one side and 50 1/2" long on the other. Color is tan or sand. Litehouse pool about six years old
 Reply

A  Answered on 4/11/2017 by InyoPools Product Specialist Andy O.

Hello Don, Unfortunately, we can not match parts based on dimensions. We would need the part numbers or for you to send in the following:Please email the following pictures/information to upload@inyopools.com: Size & approximate age of the pool Image of the pool wall. Image of the upright Image of the top rail connection to the upright. Name of the pool (if known).
 Reply


?     Asked on 5/16/2017by Guest

What is the distance from center hole to center hole on the underside of the cover?
 Reply

A  Answered on 5/16/2017 by InyoPools Product Specialist Robert M.

The distance is 1-1/2".
 Reply


?     Asked on 5/26/2019by Steve

I have a Artesian 8500 series pool 21' round. 54" wall. These LOOK identical to my top caps. Will they fit? I got pool in 2007
 Reply

A  Answered on 5/28/2019 by InyoPools Product Specialist Robert M.

Yes, part number 10146 is the correct cap for the Artesian 8500 series.
 Reply


?     Asked on 6/10/2019by Laurie

Hello, We have an Artesian Echo Canyon 54 pool (24' round X 54" High). Our pool is approximately 14 years old. We just replaced the liner and found that a couple top caps are cracking. 1. Would these top caps (part # 10146) fit our pool? 2. What support caps should we get for the top cap? Thanks so much!
 Reply

A  Answered on 6/11/2019 by InyoPools Product Specialist Robert M.

Hello Laurie - Part number 10146 will work with the Artesian Echo Canyon. Part number 10159 is the top cap support. 
 Reply


?     Asked on 7/8/2019by David Musall

Where can I purchase the correct screws to secure the Wilbar 10159 support to the 10146 Top cap? Or what screws do I need? Length, size etc.
 Reply

A  Answered on 9/27/2019 by InyoPools Product Specialist Michelle B.

Thank you for contacting INYO Pools. Unfortunately, the above ground pool parts are not universal. Before we are able to recommend replacement parts, we'll need to identify the pool. Can you please send us the following images?Outside Pool Wall (Top to Bottom), Top Cap, Top Rail, Upright to AGparts@inyopools.com?
 Reply


?     Asked on 7/15/2019by cathy

We have an artesian new york seville are these the right caps?
 Reply

A  Answered on 7/16/2019 by InyoPools Product Specialist Lennox H.

Hi, Cathy. Yes, this is the correct replacement Top Cap. 
 Reply


?     Asked on 6/12/2020by Jeffrey Osborne

will this fit shadow river 16x28 artesian pool
 Reply

A  Answered on 6/12/2020 by InyoPools Product Specialist Patrick P.

Hi Jeffery,  It looks pretty close. The Artesian Shadow River top cap part number was 11456. Unfortunately, the manufacturer discontinued the cap and there is not currently a suitable replacement.
 Reply


?     Asked on 7/14/2021by John P. May

Do you have Pool Caps for 15x24 Artesian Sellille II pool installed in spring of 2004. There is a part 10146 Alternative Part 10112 "Top Cap (Single) Doesn't not include support)

 Reply

A  Answered on 7/14/2021 by InyoPools Product Specialist Patrick P.

Hi John, Yes, part number 10146 is the correct cap for the Artesian Seville II 8500 Series.
 Reply