?     Asked on 4/14/2017by Mark

Do you have these covers in grey?
 Reply

A  Answered on 4/14/2017 by InyoPools Product Specialist Lennox H.

Hi, Mark. The part number for the gray cap is 1490479.
 Reply


?     Asked on 4/30/2017by Carol

I also need the bottom part to this pool cap.. we have an Atlantic Concorde pool and have several broken caps top and bottom, can you give me that part # as well?
 Reply

A  Answered on 4/30/2017 by InyoPools Product Specialist Scott W.

If you can attach pictures of the parts you need replaced I can see if we have anything that will fit your pool.
 Reply


?     Asked on 4/1/2020by Petr Motorny

Could you please tell me what will be the weight if the pack 10 pcs, including packing materials? Approximately. I need it for the further shipment. Regards, P.Motorny
 Reply

A  Answered on 4/6/2020 by Industry Professional

Hi, The approximate weight with packaging will be about 10 - 12 pounds.
 Reply


?     Asked on 6/20/2020by Julie Turkington

Will these become available again?
 Reply

A  Answered on 6/21/2020 by InyoPools Product Specialist Hector F.

We should get more of these in stock however that manufacturer has been just down due to the pandemic with no concrete reopen date as of yet. 
 Reply


?     Asked on 1/28/2021by Idaliz Vangorden

Ho will these be available this coming season? Im in need of replacing all of the caps on my pool. Thank you.
 Reply

A  Answered on 2/4/2021 by InyoPools Product Specialist Hector F.

Hi Idaliz, I would suggest checking back with us in approximately a month as that is when we typically get these parts replenished. 
 Reply


?     Asked on 6/7/2021by Vince Galie

Do you sell the top rails that go with that plastic cap?
 Reply

A  Answered on 6/7/2021 by InyoPools Product Specialist Patrick P.

Hi, We'd be glad to assist you. For matching above-ground pool parts we will need any or all of the following information. Do you know the make and model of your pool? Pool Size? We will also need a few photos, please supply a close-up photo of your top cap, top rail, and a wide shot showing the pattern of your pool wall. Also if you can pull any part #'s from the top cap, normally this is stamped into the underside of the top cap so you may need to remove the top cap. If you have any documentation from the pool like the owner's manual then if you could send us the page showing the parts diagram then that is always helpful as well. To supply this information and photos simply click the reply link below to upload your photos and your reply. Thank you very much and we look forward to working with you!
 Reply