I have 18 x 33 Captiva pool. These clips fit the measurements and look just like the caps I have. Are these it?
Reply
Hi Brent. These are the caps for the Captiva and they work for a couple different styles of pools. Thank you for the inquiry.
Reply
I have a Wilbar Aqua Leader Captiva 48" x 24' Looks like this is the Top Cap I need. Part # 21431. Just wanted to check before purchasing16 of these. Probably least expensive is 2 10 packs?
Reply
Hi Rich. These caps are for Captiva pools, among a few others. If you're not sure you can always email us a photo of one of the ones you have and/or the dimensions. Thank you.
Reply
Will this fit a Vogue 24' above ground pool?
Reply
Hi Thomas. This cap fits many styles of pools although I don't see Vogue as one. Is there a different name of the model of pool perhaps? If you have photos/dimensions of your existing cap I may be able to identify it. You can always order one and try it too. You'd be responsible for shipping but as long as it's in new/unused condition you would get a full refund for it.
Reply
i have a ten year old 27 foot round above ground pool and would like to replace top rail caps
Reply
David, To help you find the correct parts, we will need to know the make and model of the pool.
Reply
i have a Pacifica 52' pool need to replace some of the caps will these work they look the same thanks
Reply
Hi, Karen. I looked up the Rec Warehouse Pacifica and the Cornelius Pacifica pools and this cap will not fit.
Reply
I have a 30' lomart pool. Would these work on it?
Reply
Hi, Jamey. These caps are made to fit specific pools. I'm not familiar with any Lomart models this is compatible. If there is not a p/n stamped on your cap, please send us the following info * Size of the pool & approximate age of the pool?* Image of the pool wall.* Image of the upright* Image of the top rail connection to the upright.* Name & age of the pool (if known).
Reply
Hi I have an 18x33 Wilbar swimming pool, and I am missing 8 top caps (#27035, 27036 and 13348) would these work for my pool instead of what is on it now?
Reply
Could you give me the inside and outside dimensions of the cap so I can be sure it will fit my application
Reply
Hello, we have size measurements on the 4th picture in located here.
Reply
need to replace the plastic top connectors on a doughboy 573-3190 52 deep by 24 round...are the 10 packs you have fit this pool, thanks
Reply
Hello Kevin - Unfortunately, our caps will not fit the Doughboy pools. We recommend trying the Doughboy website.
Reply
Will this fit a 2016 or 2017 24' Reprieve above ground round pool? Also do you have top ledges for this pool? And do you have them in gray?
Reply
I need top conectors for 24 round pool
Reply
Hi, We'd be glad to assist you. For matching above-ground pool parts we will need any or all of the following information. Do you know the make and model of your pool? Pool Size? We will also need a few photos, please supply a close-up photo of your top cap, top rail, and a wide shot showing the pattern of your pool wall. Also if you can pull any part #'s from the top cap, normally this is stamped into the underside of the top cap so you may need to remove the top cap. If you have any documentation from the pool like the owner's manual then if you could send us the page showing the parts diagram then that is always helpful as well. To supply this information and photos simply click the reply link below to upload your photos and your reply. Thank you very much and we look forward to working with you!
Reply
I am trying to replace an Atlantic Caribbean Top Cap, Part #1490201. Do you have these?
Reply
I am sorry to say that we are currently out of stock on the Inner Top Cap 1490201 and the Outer Top Cap 1490495 at this time. Click on the "Notify me when in stock" button on the product webpages and we will email you when they are back in stock.
Reply
