I need the Top Cap - Beige - PRM-3530, which is no longer available. Which other cap should I order that would come closest to the cap that is no longer available? Or, do you know where I could get a Top Cap - Beige - PRM-3530?
Reply
Hi Carla, Unfortunately, we no not have a replacement cap that will work as a substitute.
Reply
I'm hunting 19 T3530 top caps. Can you please help me.
Reply
Hello Katie,We recently received 13 of these caps and they are now available on the product page. You can order just the 13 and place aseparate order for the additional 6. When we get replenished on the stock of this cap, we can fill the rest of your order. Please note that there can be a lead time of up to 4 weeks before the remainder of your order is filled. The 13 just became available, so time is of the essence when ordering what we have on hand.
Reply
Is there any other option or cap style that can be used in place of this one? I am replacing all 12 on my 18 round, I believe it is a cornelius pool, not sure, but this is def the cap style and size.
Reply
Hi, Gary. We do not have another cap that can be used in place of this one at this time.
Reply
Looking for two piece caps for a silverado swimming pool about 20 years old?
Reply
Can you send our above ground department photos under contact and support with the following. Once they receive it we will review and reply. of * Size of the pool & approximate age of the pool? * Image of the pool wall. * Image of the upright * Image of the top rail connection to the upright. * Name & age of the pool (if known). The more information and photos provide the better chance at finding the parts needed.
Reply
Why didn't our new caps come with hardware? Screws and the small caps that cover the screw! Very disappointed when our package arrived today!
Reply
Hi, Rhonda. The caps did not come with screws because the manufacturer does not include screws with the caps. Caps can be used on several different pools which may use different hardware. I'm sorry you were disappointed.
Reply
I have a 15x24 Regency pool Model - Peaks (lt grey) I need to replace the top cover caps My pool was installed in 2005 and I . am not sure which ones I need. Also do I need to buy the bottom portion if I only need to replace the top? The # underneath the cap is T3530 . thank you
Reply
Hello, You might check the specs on this cap.
Reply
I received the 20 top cover caps that I ordered and they are exactly what I needed. However, I did not receive screws or the small plastic pieces that cover the screws. Please advise. thank you.
Tammy Jackson
Reply
Hi, Tammy. The hardware are not included with the cap, you will have to reuse your existing hardware.
Reply
Can you please point in another direction or give a substitute part or parts that well work?
Reply
Hello, I apologize, but this part is only for specific models and we don't have any substitute part for this top cap.
Reply
I believe the top caps on my pool are part no. PRM-3530. It says in your description that it is commonly used on the Patriot Silverado. So why is this one not listed on all the pools you have listed? I need some top rails for my pool.
Reply
Hello Tim - Unfortunately, we do not carry the top rails for the Patriot Silverado. We recommend trying www.teddybearpools.com.
Reply
Do you have the bottom boot that goes with the Wilbar Top Cap PRM-3530?
Reply
Hello, Dawn. Unfortunately, we cannot determine the bottom boot by the top cap. l. Before we are able to recommend replacement parts, we'll need to identify the pool.Can you please send us the following images? Outside Pool Wall (Top to Bottom), Top Cap, Top Rail, and Upright. If so, please use the link https://secure.inyopools.com/Support/SupportRequest.aspx
Reply
When can I order? Top Cap - Beige - PRM-3530
Reply
Hi Eric, many of these above ground pool parts sold out for the season due to the manufacturer being shut down for some time during the pandemic. Typically we have these parts replenished come February or March so I would advise checking with us during that time frame.
Reply