?     Asked on 2/8/2017by Jeff

The bulb that goes into this fixture is marked e11,t4 type 130v 100 watts , will this bulb fit in this light fixture?
 Reply

A  Answered on 2/8/2017 by InyoPools Product Specialist Lennox H.

Hi, Jeff. This bulb is not compatible with your fixture. There is not an LED bulb that will fit the fixture that you have.
 Reply


?     Asked on 3/11/2017by warren

will this work with pentair orginal bulb is 12 volt - 100 watt
 Reply

A  Answered on 3/12/2017 by InyoPools Product Specialist Patrick P.

Hi Warren, If your bulb is 12 volt then you would need the 12 Volt LED PureColors Spa Bulb. To make sure the PureColors bulb will work in your Pentair light fixture, you will need to double check that your current bulb has a screw in base like this Spa Bulb if your bulb does have a screw in base then the 12 Volt PureColors LED Spa Bulb will work for you.
 Reply


?     Asked on 4/19/2017by jon

i want to replace my pool and spa bulbs, for the pool i want to buy the RF bulb but i don't see any spa RF bulb, so how can i make it work so both bulbs synchronize?
 Reply

A  Answered on 4/19/2017 by InyoPools Product Specialist Stacey M.

Hello Jon, If you have two RF Remote bulbs they may not always synchronize. Because the lamps are installed underwater and the water will block the signal in various degrees, also since the bulbs are at different distances this can affect synchronizing. Most likely your lights will also be hooked up to a light switch and if the lights are wired to the same switch then cycling through the color show with your light switch instead of the remote will ensure that the bulbs synchronize together in color changing mode. Please make sure you have housing that is compatible which is Hayward Astrolite II SeriesPentair SpaBrite Series.
 Reply


?     Asked on 5/17/2017by jake

My fixture is pentair and states series 77xxxxxx: watts 100: volts 120: bulb type T-4. Is there a color change led bulb that will work with this fixture?
 Reply

A  Answered on 5/20/2017 by InyoPools Product Specialist Lennox H.

Hi, Jake. Unfortunately, there is not a LED bulb that replaces a T-4 bulb.
 Reply


?     Asked on 7/21/2017by Randy Avery

What are the dimensions of this bulb specifically the length and diameter? How many light color changing patterns does it have?
 Reply

A  Answered on 7/21/2017 by InyoPools Product Specialist Lennox H.

Hi, Randy. To view the dimensions of this bulb, click this Product Dimensions link and the light programs are available in the PureLine PureColors LED Owners Manual.
 Reply


?     Asked on 11/29/2017by Inyo Visitor

Will this be able to be controlled by pentair easy touch system? The same system controls an intellibrite.
 Reply

A  Answered on 11/30/2017 by InyoPools Product Specialist Lennox H.

Hi. This bulb can be controlled by the Pentair EasyTouch System using the On/Off cycling feature. 
 Reply


?     Asked on 7/17/2018by Serg

Will this light bulb work with my spa light fixture (Series 7856XX, Watts 100, Volts 120, Bulb Type R-20)?
 Reply

A  Answered on 7/18/2018 by InyoPools Product Specialist Lennox H.

Hi, Serg. Yes, this LED Spa Bulb Color Changing 120V 5W - PL5817 will fit that series fixture. 
 Reply


?     Asked on 7/19/2018by Serg

Is there any lumen difference in this bulb and LED Spa Bulb White Light 120V 5W - PL5847. Also which gasket should I order for 7856XX series fixture? Thanks.
 Reply

A  Answered on 7/20/2018 by InyoPools Product Specialist Lennox H.

Hi, Serg. The lumens are the same between the 120 and 12 volt bulbs. You can use one of the follow Lens Gasket - 79108500 (OEM), LPL-M-G-P (Heavy Duty) or O-344 (Generic). 
 Reply


?     Asked on 8/18/2018by Inyo Visitor

Is this bulb compatible with Pentair SpaBrite 7810x series fixtures?
 Reply

A  Answered on 8/18/2018 by InyoPools Product Specialist Lennox H.

Hi. Yes, this LED bulb is compatible with the Pentair SpaBrite 7810x series fixture. You will also need one of the Lens Gasket - 79108500 (OEM), LPL-M-G-P (Heavy Duty) or O-344 (Generic).
 Reply


?     Asked on 3/14/2019by Ted

My spa light label shows PentairSeries 64000X and Underwater Lighting Fixture No. T-013274. Will this bulb work for me?

 Reply

A  Answered on 3/14/2019 by InyoPools Product Specialist Lennox H.

Hi, Ted. This bulb is not compatible with your fixture, PureColors LED Fixture Kit - PL5861 (50 ft) or PL5862 (100 ft). 
 Reply


?     Asked on 5/7/2019by Mike

Will this fit an American product 7810XX 120v 100w r20. If not is there a comparable led that will? Thanks

 Reply

A  Answered on 5/7/2019 by InyoPools Product Specialist Kevin G.

Hi. Yes, this LED bulb is compatible with the Pentair SpaBrite 7810x series fixture. You will also need one of the Lens Gasket - 79108500 (OEM), LPL-M-G-P (Heavy Duty) or O-344 (Generic).
 Reply


?     Asked on 6/16/2019by Erin

Hi, we have a Spabrite fixture, but I can't read/find a model number (see picture). Do you know if this bulb will work? Thanks!

 Reply

A  Answered on 6/16/2019 by InyoPools Product Specialist Lennox H.

Hi, Erin. This LED bulb PL5817 can be used if its 120 volts, if not P/N PL5816 for 12 volts. 
 Reply


?     Asked on 6/27/2019by Patrick Grommersch

Will this fit my 05605 series STA-RITE sunlite small underwater pool light?
 Reply

A  Answered on 6/27/2019 by InyoPools Product Specialist Patrick P.

Unfortunately, the Pureline LED Spa light bulb is not compatible with the Sta-Rite Sunlite.
 Reply


?     Asked on 6/28/2019by Patrick Grommersch

Is there an LED bulb that will fit my 05605 series STA-RITE sunlite small underwater pool light?
 Reply

A  Answered on 6/28/2019 by InyoPools Product Specialist Lennox H.

Hi, Patrick. Unfortunately, there is not an LED bulb that will fit the SunLite. 
 Reply

  • Commented on 6/28/2019 by Product Owner

    Is there a replacement fixture for this that would enable me to use an LED bulb?
     Reply

    • Commented on 6/30/2019 by InyoPools Product Specialist Patrick P.

      Patrick, The Sunlite has a unique fixture so you have to replace a Sunlite with a Sunlite and there is not a LED option available.
       Reply


?     Asked on 7/23/2019by Ed Fleming

Do you have a replacement fixture that would enable me to use an LED bulb for my spa? I'm looking to replace my existing fixture Hawyard SP591HSL100 that uses a halogen. I've included a link to a picture of the existing fixture I'm looking to replace http://www.internetpoolstore.com/index.php?main_page=product_info&cPath=1537_1631_1670_1671&products_id=24721
 Reply

A  Answered on 7/23/2019 by InyoPools Product Specialist Lennox H.

Hi, Ed. The Astrolite II Spa Fixture 100W 120V 100' Cord - SP0591SL100 with this PureColors LED Bulb - PL5817.
 Reply


?     Asked on 9/5/2019by Brett

I have the Jandy WSHV100WS100 will this bulb work?

 Reply

A  Answered on 9/5/2019 by InyoPools Product Specialist Lennox H.

Hi, Brett. Unfortunately, this bulb is NOT compatible. You can use the  ColorSplash LXG LED Spa Lamp 120V - LPL-S2-RGB-120 is compatible.
 Reply

  • Commented on 9/5/2019 by Product Owner

    thank you so much for the quick response.
     Reply

    • Commented on 9/5/2019 by InyoPools Product Specialist Lennox H.

      Brett, You're Welcome.
       Reply


?     Asked on 9/8/2019by Tommy

Wondering as well if this bulb will work with my light fixture. The screw in is smaller than a normal bulb but so many types of bulbs hard to know for sure.
 Reply

A  Answered on 9/12/2019 by InyoPools Product Specialist Hector F.

These bulbs are only compatible with certain pool light fixture models. This one is compatible with the Hayward Astrolite II Series and the Pentair SpaBrite Series.  
 Reply


?     Asked on 11/11/2019by Matt

Will this bulb replace my Zodiac white light bulb part # R0450505?
 Reply

A  Answered on 11/11/2019 by InyoPools Product Specialist Lennox H.

Hi, Matt. Unfortunately, it will not. This bulb is NOT compatible with any Jandy fixtures. 
 Reply


?     Asked on 12/6/2019by Gregory Robinson

Is this bulb discontinued? Is there an alternative bulb to this if so?
 Reply

A  Answered on 12/9/2019 by InyoPools Product Specialist Steve M.

Gregory, the LED Spa Bulb Color Changing 120V 5W - PL5867 has not been discontinued, it is just out of stock for the remainder of the 2019 pool season. 
 Reply


?     Asked on 5/14/2020by Ben Hui

Is this bulb now discontinued or will it be available again? If it’s discontinued can you suggest and color led bulb for the spa?
 Reply

A  Answered on 1/5/2021 by InyoPools Product Specialist Hector F.

Hi Ben, these LED bulbs are now discontinued however you can also use the J & J Colorsplash LED bulb series as well. 
 Reply


?     Asked on 9/1/2020by Brett Lewis

I see this item is no longer available. Is there an alternative? I have a pentair fixture part number 78108200
 Reply

A  Answered on 12/21/2020 by InyoPools Product Specialist Hector F.

Hi Brett, you can also use the J & J Colorsplash LED bulb with this pool light. You will also need a Pentair Spa Brite lens gasket when replacing the bulb. Here is a guide that we put together for changing a pool light bulb that may offer some more guidance as well. 
 Reply


?     Asked on 8/9/2021by John Sciarappa

Is this a G-3 fixture?
 Reply

A  Answered on 11/18/2021 by InyoPools Product Specialist Joe S.

Hello, this would not be the 3-G replacement you would want to order ColorSplash LXG LED Spa Lamp 120V - LPL-S2-RGB-120.
 Reply