I have a Doughboy media filter model number 0-1701-016. My filter is leaking where you backwash or pump to waste. I replaced the spring and seal and it still leaks. Is there a "plug" that I can screw onto that to stop the leaking? Part number? Thank you!
Hi, Dan. I'm not aware of a threaded plug that you can use. However, a Winter Plug can be used.
Reply
Do you have a sight glass/valve for Pentair Tagelus TA60D sand filter - 2012
Reply
Here is the Sight Glass for Tagelus TA60D and here is the Sight Glass O-Ring for Tagelus TA60D
Reply
Will this part fit Pentair Sand Dollar Top Mount Filter Model SD60 (Model 145322) ?
Reply
Hi Dan, this will not likely fit your current multiport valve. Could you send us a few photos of your valve or provide the model number? If you provide images we will need a complete image of the valve and another looking down onto it. To supply photos simply click the reply link below and upload your photos. Once we get those photos we can make the proper recommendation.
Reply
i need a sight glass for a sand dollar 80 P/N145386 please help thanks
Reply
Hi Adam, You will require this Sand Dollar Pool Filter Sight Glass and not the Sight Glass listed on this page.
Reply
Searching for a sight glass for Hayward pump and was curious if you have one available?
The sight glass for your Hayward SP0714T is part number 4700-12.
Reply
looking for sight glass for dream line sand filter model S190TSCPE
Reply
Hi Shelia, Please click on this link for the sight glass you will require - Hayward Sight Glass
Reply
I need a 1.25 in diameter
Hi, Could you send us a few photos of your filter to include a photo of the label on your filter tank, your filter valve, and a wide-shot of the complete filter and valve? To supply photos simply click the reply link below and upload your photos. Once we get those photos we can make the proper recommendation.
Reply