1. Home
  2. Salt Chlorine Generators
  3. Inground Pool Salt Systems
  4. INYO's Recommended Salt Chlorine Generators
  5. PL7714
  6. Q & As

?     Asked on 2/10/2019by Joe Nelson

What is the NEMA classification of the controlpanel enclosure?
 Reply

A  Answered on 2/14/2019 by Pureline

This is a Nema 1 Enclosure.
 Reply

  • Commented on 2/14/2019 by Product Owner

    So, since the NEC classifies a pool pump and filter room as a Corrosive Environment (NEMA 4X) where do you suggest we locate your control panel?
     Reply

    • Commented on 2/19/2019 by InyoPools Product Specialist Lennox H.

      Hi, Joe. We do not have a Nema 4X box, you will have to purchase one that will be able to accommodate the controller of this system. 
       Reply

    • Commented on 2/19/2019 by Pureline

      If possible we would suggest placing the control box outside of the equipment room. If that is not possible then we would suggest placing as far away from any items that dispense chemicals.
       Reply


?     Asked on 2/11/2019by Inyo Visitor

Does this system replace chlorine?
 Reply

A  Answered on 2/11/2019 by InyoPools Product Specialist Hector F.

This system replaces the need to have to manually add chlorine to the swimming pool for it generates chlorine. 
 Reply


?     Asked on 3/20/2019by Inyo Visitor

Will This work with 1 1/2 inch lines?
 Reply

A  Answered on 3/20/2019 by InyoPools Product Specialist Lennox H.

Hi. Yes, this system can be plumbed using 1-1/2" pvc pipe. 
 Reply


?     Asked on 5/5/2019by Richard Lapointe

Regarding the Crystal Pure Cell length, the photo on your produce page shows the length as 13 3/8. Measuring mine I get 12 1/4. Is the produce page wrong or am I measuring wrong?
 Reply

A  Answered on 5/5/2019 by Pureline

We have re-measured this salt cell and we do get the length of 13-3/8" as shown in this Crystal Pure Salt Cell Dimensions Image.
 Reply

  • Commented on 5/7/2019 by Product Owner

    I remeasured mine with my wife as a witness and still am getting 12 3/8. I also get 12 3/8 when I measure the dummy cell that I purchased from Inyo. I have attached a photo of my cell measurement.

     Reply

    • Commented on 5/7/2019 by InyoPools Product Specialist Patrick P.

      Hi Richard, I personally went out to the warehouse and measured and you are correct this cell does measure 12-1/4" without the unions. I do apologize for the confusion!
       Reply

  • Commented on 5/5/2019 by Product Owner

    We are talking about Pureline PN PL7714 correct. I measured again and I am still getting 12 3/8. I also have the dummy cell and it also measuring 12 3/8. I have attached a picture. Thanks Rich Lapointe

     Reply


?     Asked on 10/31/2019by Inyo Visitor

do I use this same system on a 15000 gal pool
 Reply

A  Answered on 10/31/2019 by InyoPools Product Specialist Lennox H.

Hi. Yes, you can use this size system for a 15,000 gallon pool. It will operate more efficiently and will last longer.  
 Reply


?     Asked on 12/2/2019by Vicnent Nguyen

is it hayward made?
 Reply

A  Answered on 12/3/2019 by InyoPools Product Specialist Lennox H.

Hi, Vicnent. No, this unit is manufactured by Pureline. 
 Reply