Details

Top

Model # 25677-439-000

Alternate Part #'s CMP25677-439-000

Product Description

Hit the right note with this Waterfall light Accent
CMP's Brilliant Wonders Lighted Waterfalls are the latest in LED Pool Water features. The LED strip
is built into the unit (instead of using fiber) placing the light as close to the water as possible. It is
completely serviceable. This design makes a separate light source unnecessary.

Specs:

  • 12 Volts
  • 1.5” spigot plumbing
  • 1 GPM per inch
  • 6” lip (cannot be cut)
  • 100 feet of 12 volt cord is included
  • Light shows: fade from one color to the next, strobe and a timer feature to automatically shut off in choices of 5 minutes, 15 minutes or 30 minutes
  • One waterfall remote kit which is required and sold separately can control up to a combination of 20 feet of waterfalls.

CMP has an exclusive “sawtooth lip” which gives slight turbulence, helping to pick up the light in the water.

cmp brilliant waterfall sawtooth

Note: One Waterfall Remote Kit is required to power the Brilliant Wonders LED Pool Waterfall. One remote kit will power any combination of Brilliant Wonders LED pool waterfalls up to 20 feet of combined width. The components of the waterfall remote kit are shown below.
CMP Waterfall control
cmp waterfall controller



Product Specifications

Color:
Tan
Lip:
6 in.
Width:
48 in.
Top

?     Asked on 7/24/2015by Inyo Visitor

Does the 6" lip protrude out of wall if mounted like in the picture when the waterfall is off? Is the led light always on?
 Reply

A  Answered on 7/24/2015 by InyoPools Product Specialist Charlie R.

No, the lip does not protrude out of the wall. The lip is actually just the distance the water will shoot out from the base. The waterfall will actually come with a timer feature that will allow you to automatically shut off the light in 5, 15, or 30 minutes.
 Reply


?     Asked on 5/16/2016by Jan

Hello, is it 110 v or 110/220 Pierre source?
 Reply

A  Answered on 5/17/2016 by InyoPools Product Specialist Matt S.

The Brilliant Wonderfall's power supply accept 110 voltage and then reduces the volts down to 12 volts for the LED light driver.
 Reply