$234.89
Part # STA0062
Manufacturer Code ECS0276
Your Source for AquaCal Heat Pump Parts - INYOpools.com
Replacement Display for AquaCal Heat Pumps H155AHDECNH 155AHDEBNH 120AHDEBNH 110AHDSBTK and more
*PLEASE NOTE- The STA0062 has been replaced by the Replacement Display for AquaCal Heat Pump - ECS0276 if you order the STA0062 you will receive the new style Replacement Display for AquaCal Heat Pump - ECS0276.
OLD NEW
This might be the one I need. The one on my heat pump cannot display the numbers due to the strong sun light. Now I have two questions:
1. The model I have right now is: 110AHDSBTK. Can this one be installed on it?
2. Is it easy to install it by myself?
Reply
Good morning Allen, Just make sure the corners are round and not squared off and yes you can install it yourself. The only issue with this part is it is not in stock and is special ordered through the manufacturer so lead time is 2-3weeks.
Reply
I have a Leisure Temp Heater, I need a new control Panel. It appears to be the same as the Aqua Cal, is this correct? What is the availability?
Thanks
Reply
Leisure Temp is an AquaCal product but I would recommend giving AquaCal a call, 727-823-5642, to confirm with them that the control panel you are looking at is the correct replacement for your heat pump.
Reply
How do I install the replacement display panel on my heat pump? It appears the whole front panel of my heat pump must be removed to get to the plug in.
Reply
Yes, the front panel on the heat pump needs to be removed and then the cover plate on the electrical panel needs to come off too. After that you can just plug in the connecting wire from the new panel and secure the wires. Probably less than 30 minutes for the whole thing.
Reply
Less than 1 hr
Screwdriver
11 0
Control panel is easy to remove and just has 2 screws. I removed both the top and front panels of the heating unit but realized I only needed to remove the front one. There is also a panel to remove that houses the electrical connections. Make sure to follow the original cable run and the plug in is simple. Once everything was re-attached the new panel has worked great.
