By Fiberstars
Model # 6004AS
Light with no electricity or heat
Fiberstars fiber optic lighting systems are safe and affordable. Featuring metal halide technology, our fiber optic lighting systems offer you the same lamp technology you find in many luxury cars today. The light source is positioned well away from your pool and no electricity and virtually no heat is transferred through fibers. Fiberstars – the utmost quality in manufacturing, engineering and safety.
We offer synchronized fiber optic units for multiple light installations. We also have the ability to combine our exclusive line of fiber optics with our new Jazz light. Run the two systems independently for a dramatic, multi-colored effect or synchronize them to enjoy the full ambiance of each color. The color wheel inside the 6004AS illuminator features four colors: blue, green, magenta and white.
Construction:
Electrical:
Lamp:
Miscellaneous:
Includes:
What is the difference between the Fiberstars 2004 and 6004 illuminators?
Reply
The 2004 model has a strand capacity of 400 while the 6004 will hold 450 fiber optic strands. The 6004 has a metal halide lamp that is rated at an average of 6000 hours. The quartz-halogen lamp inside the 2004 is rated at 400-700 hours average. The 6004 model is more energy efficient than the 2004 and consumes less power.
Reply
Will the Fiberstars 6004 or 6004AS light up 2 lights and perimeter lighting?
Reply
The number of lights the 6604 and 6004AS will illuminate will depend on the number of fiber strands. The 6604 and 6004AS will accept up to 450 strands of fiber.
Reply
Hi can you advise if this unit is a direct replacement of my 15 year old fibre stars control box which is controlled by a Jandy Aqualink control box
Reply
This is the new version of the FiberStars illuminator. This new illuminator will work with any fiber optic cable and the Aqualink system. It will hold 450 strands of fiber.
Reply
I am looking to replace my illuminator with the 2004 or 6004. I have 2 locations so I would need 2. My question is can I get both of them on 1 remote to turn on and off, and change colors. thank you
Reply
Hi Scott - If these are two separate pools then you would need two separate remotes. If you use the AutoSynch units on one pool then you could go with one remote to control both units as the two illuminators would be wired together.
Reply
