$819.06
By Intermatic
Model # PE153PWLS
New Mini-PE Series Digital Controls
Intermatic’s NEW MINI-PE Series Digital Controls couple the standard features
of our compact T100 Series with the convenience of digital automation. The latest
innovation from Intermatic, the P1353ME allows the ability to program up to
three circuits. Beyond single and two-speed pump/booster pump applications,
auxiliary modes can control pumps up to 3HP as well as underwater, garden and/or
fountain lighting. Countdown and override features allow cycle interruptions
when pool/spa service is required. All timing and protection associated with
filter pump/booster pump combos and two-speed pumps has already been integrated
into the digital software. The MINI-PE Series is available in both metal and
plastic enclosures and with a wired or wireless remote command, freeze probe
or both. See chart below for details.
I-Wave Wireless Pool/Spa Control:
Intermatic’s wireless pool and spa controls utilize ground-breaking Z-wave™
technology. While some controls communicate transmission problems, Intermatic’s
wireless devices allow total and uninterrupted communication between the controller
and the equipment.
Applications:
• Single Speed Pump/Booster Pump Combos • Two-Speed Pump/Booster
Pump Combos
• Water Feature Applications • Garden & Fountain Applications
• Pool & Spa Lighting • Landscape Lighting
Modes:
Mode 1 – (Aux1, Aux2, Aux3) - The time switch is a 3-circuit
switch with all three switches controlling auxiliary devices.
Mode 2 – (Pump High, Pump Low, Aux3) - The time switch
is a 2-circuit switch with the 1st & 2nd switch controlling a 2-speed pump.
The 3rd switch is controlling any auxiliary device. All protection associated
with a two speed pump is preprogrammed into this mode.
Mode 3 – (Pump, Aux2, Cleaner Pump) - The time switch
is a 3-circuit switch with the 1st switch controlling a single speed pump, the
2nd switch controls any auxiliary device, and the 3rd switch operates a booster/cleaner
pump. All timing & protection associated with a filter pump/cleaner pump
combination is preprogrammed into this mode.
Mode 4
– (Pump High, Pump Low, Cleaner Pump) - The time switch is a 2-circuit
switch with the 1st & 2nd switch controlling a 2-speed pump. The 3rd switch
is controlling a booster/cleaner pump. All protection associated with a 2-speed
pump and booster/cleaner pump combination is preprogrammed into this mode.
Mode 5 – (Pump L1, Pump L2, Aux3) - The time switch is
2-circuit switch with the 1st & 2nd switch controlling a 240V pump, where
both L1 & L2 are required to be disconnected when the pump is turned OFF.
The 3rd switch is controlling any auxiliary device.
Click Here
for PE153ME Digital Mechanism Brochure
Click Here
for PE153 Digital Time Clock & Accessory Brochure
Specifications:
Case – NEMA 3R rated for indoor-outdoor installation.
9-3/8" (23.8 cm) high, 5-1/2" (14.0 cm) wide, 3-5/8" (9.2 cm)
deep in
beige finish. “P” suffix models are same dimensions, except made
from outdoor grade plastic.
Knockouts – Combination 1/2" – 3/4" nominal
knockouts, one on back and each side of case and two on bottom.
Switch Rating (each circuit) – 20 Amp Resistive, 120/240
VAC, 50/60 Hz; 20 Amp FLA @ 120 VAC, 96 Amp LRA @ 120 VAC, 50/60 Hz; 17 Amp
FLA @ 240 VAC,
80 Amp LRA @ 240 VAC, 50/60 Hz; 5 Amp Tungsten, 120/240 VAC, 50/60 Hz; 5 Amp
Ballast, 120/240V VAC, 50/60 Hz
Shipping Weight – 3.75 lbs
The information Below is
displayed in the following order Model #, Description, Switch, Clock electrical
supply
PE153 - Digital Time Clock in Metal Enclosure, 3 - SPST, 120V or 208-240V
PE153W - Digital Time Clock in Metal Enclosure with 100' Wired Remote Command,
3 - SPST, 120V or 208-240V
PE153WLS - Digital Time Clock in Metal Enclosure with Wireless Remote Command,
3 - SPST, 120V or 208-240V
PE153F - Digital Time Clock in Metal Enclosure with Freeze Protection Probe,
3 - SPST, 120V or 208-240V
PE153WF - Digital Time Clock in Metal Enclosure with 100' Wired Remote Command
& Freeze Protection Probe, 3 - SPST, 120V or 208-240V
PE153WLSF - Digital Time Clock in Metal Enclosure with 100' Wireless Remote
Command & Freeze Protection Probe, 3 - SPST, 120V or 208-240V
PE153P - Digital Time Clock in Plastic Enclosure, 3 - SPST, 120V or 208-240V
PE153PW - Digital Time Clock in Plastic Enclosure with 100' Wired Remote Command,
3 - SPST, 120V or 208-240V
PE153PWLS - Digital Time Clock in Plastic Enclosure with 100' Wireless Remote
Command, 3 - SPST, 120V or 208-240V
PE153PF - Digital Time Clock in Plastic Enclosure with Freeze Protection Probe,
3 - SPST, 120V or 208-240V
PE153PWF - Digital Time Clock in Plastic Enclosure with 100' Wired Remote Command
& Freeze Protection Probe, 3 - SPST, 120V or 208-240V
PE153PWLSF - Digital Time
Clock in Plastic Enclosure with 100' Wireless Remote Command & Freeze Protection
Probe, 3 - SPST, 120V or 208-240V
If there is a power outage will it retain the programmed cycles?
Reply
The PE153 does have a battery backup. The capacitor can hold a 4 hour charge. The programs stay locked in even if the power is out longer. You would just need to reset the time.
Reply
Can we program each separate circuit to independently turn on/off at different times of the day and for different amounts of time?
Reply
Yes, the timer can be set to run the different circuits at different times.
Reply