PER THE MANUFACTURER: THIS ITEM IS NOT AVAILABLE FOR SALE ONLINE

By Pentair Pool Products


Details

Top

Model # 460963

Warranty SEE WARRANTY CARD

Alternate Part #'s PEN460963

Product Description

 



Simply the most economical way to heat your pool and spa. With today's record energy costs, there's never been a better time to invest in a heat pump. Compared to gas, oil or electric heaters, UltraTemp uses just a fraction of the energy to generate the same amount of heat.

An Eco Select ™ Brand: UltraTemp ® High Performance Heat Pumps transfer heat from the atmosphere to the pool or spa, saving up to 80% in energy costs compared to gas-fired heaters. Plus, they are the only heat pumps available that use R-410A refrigerant, EPA-recognized as environmentally safe and clean.

 

  • 100% titanium heat exchanger assures corrosion-free performance for extra long life and value.
  • LCD control board displays an intuitive, menu-driven readout with easy to follow, full word messages - no more codes.
  • AutoSet (time clock over-ride) feature monitors water temperature and turns the water circulation pump on and off as needed to maintain desired pool termperatures
  • Automatic defrost feature senses refrigerant temperature and prevents UltraTemp from freezing, allowing the heat pump to operate at even lower temperatures
  • Compatible with All automated control packages
  • Long-life corrosion resistant plastic composite cabinet stands up to severe climates and pool chemicals
  • Emerson Copeland Scroll Compressor
  • ETL listed for safe operation
  • Thermostatic Expansion Valve (TXV) controls refrigerant flow for optimum effciency and BTU output over a wider operating range
  • Highest effciency available, meets or exceeds existing codes and standards
  • BTU and effciency performance independently certified by the Air-Conditioning, Heating and Refrigeration Institute, AHRI







For More Swimming Pool Heat Pumps

Product Specifications

BTU:
127,000 BTU
Heat Exchanger:
Titanium
Compressor:
Scroll
Phase:
Single
Coefficient of Performance:
5.7
Volts:
230
Hz:
60 Hz
Recommended Breaker Size:
50
Wire Size:
8
Dimension A:
45.5 in.
Special Feature:
Black
Top

?     Asked on 8/20/2018by Dducts

Does this unit reverse and cool the pool as well?
 Reply

A  Answered on 8/23/2018 by InyoPools Product Specialist Lennox H.

Hi, Dducts. This unit is unable to cool, you can use the follow model, 460965460935 and or 460959
 Reply


?     Asked on 12/27/2018by Eric

Hi, I have the Ultratemp 120 heat pump and an i-Aqualink wi-fi controller that does not appear to be able to turn the heat pump on or off. Can the Ultratemp connect to the i-Aqualink wirelessly? In the meantime, I have to push through the shrubs to access the unit to turn it on and off each time I want to heat the spa or the pool? Can the unit be left on all the time? It seems to run constantly if I don't turn it off. Thanks for your help. Eric
 Reply

A  Answered on 12/27/2018 by InyoPools Product Specialist Lennox H.

Hi, Eric. The UltraTemp will not be able to connect to the iAquaLink Controller. The unit can be left on using the water flow to active it when it calls for heating your pool or spa. 
 Reply


?     Asked on 12/31/2019by Derek Haggard

Will all pentair models work even if the water temp is low? Somebody told me they wont heat the pool if the water temp is 40° and under, regardless of the out door temp
 Reply

A  Answered on 1/6/2020 by InyoPools Product Specialist Matt S.

The Pentair UltraTemp has an air temperature threshold of 50 degrees Fahrenheit. When the unit senses air temps below that, the compressor shutss off and it switches to a passive defrost cycle. In temps below 50 degrees F, the refrigerant will be too cold too effectively transfer heat. If you require a heat pump with a lower operating temperature we suggest the AquaCal Icebreaker.
 Reply