$58.28
By Rainbow Products
Model # 8-R171096
This clearance chlorinator was never used. The box was damaged in shipping but the product was not harmed. Hurry up and take advantage of this great deal!
Rainbow's 320 series of inline chlorinators are designed for permanent installation in the return line of pools and spas. It works on the pressure side of the pump. No need to drill any additional holes.
Features:
Specifications:
1 Year Warranty
* Note: Consult your local authority to determine their guidelines if needed. Results may vary due to pool/spa equipment and many other factors.
What kind of chlorine tablets do I use with this type of chlorinator? Do you sell them?
Reply
You can use either 1" or 3" tablets. We sell both - here is a link to the chlorine tablets: http://www.inyopools.com/chemicals_sanitizers.aspx
Reply
Is there a feedback mechanism that tells the unit the chlorine balance in the pool? Is this a way for me to automate addition of clorine to keep it always at the correct level? Or, just another place to put the tab aside from the the drain basket?
Reply
There is a dial on this unit which has a setting from 1-10 If you set the dial on 1 it will be letting the least amount of chlorine to the pool and if you have it set at 10 this would send the most amount of chlorine to the pool. So you can automate the feed of chlorine to the pool but you will still need to manually test your water. We do not recommend placing tablets in the skimmer basket because this high concentration of chlorine goes directly back to your pump and can cause corrosion to your pool equipment. If you do not go with the automatic chlorinator we would recommend at least going with one of our floating chlorinators so you do not damage your equipment you may view our floating chlorinators here http://www.inyopools.com/chlorinators_floating.aspx
Reply
Does the in-line chlorinator come with a check valve, or must it be purchased separately?
Reply
No this does not come with the check valve. We would highly reccommend purchasing one of the check valves listed on this page http://www.inyopools.com/valves_flo_check.aspx
Reply
I am having problems removing the lid to my Rainbow 320 chlorinator do you have any suggestions?
Reply
We would suggest using the wrench which is specifically designed for removing the Rainbow Cholrinator Lid you may purchase this part through this link http://www.inyopools.com/Products/07501352029066.htm and you may view a picture of this wrench through this link http://www.optimusparts.com/onlinecatalog2006/sec_a/a-14b.pdf
Reply
